Improvement on output torque of dielectric elastomer minimum energy structures

Abstract

The dielectric elastomer minimum energy structure (DEMES) can realize large angular deformations by a small voltage-induced strain of the dielectric elastomer (DE), so it is a suitable candidate to make a rotary joint for a soft robot. However, the payload capacity of a DEMES joint is small compared with other types of dielectric elastomer actuators. Stacking layers of pre-strained DE thin films can increase the output torque of DEMES, but greater driving power will be needed, limiting application in mobile or flying soft robots. In this paper, based on static analysis, a design of DEMES is proposed that has larger torque than the traditional design with the same number of layers of dielectric elastomer. As an experimental example, the torque of the film with the improved design is larger than 1.7 times that of the traditional design. Experiments validate the theoretical analysis and demonstrate the improvement of DEMES output torque.