Adaptive Trajectory Tracking Control for a Rehabilitative Training Walker with Center of Gravity Shift

摘要

The improvement in living conditions and the increasing life expectancy have led to the gradual aging of the population worldwide, resulting in a significant increase in the incidence of age-related health issues. Declining motor function (e.g., decreased muscle strength, coordination, and dexterity) is commonly associated with aging and can lead to potentially disabling falls. However, the workforce of healthcare providers and nurses is decreasing and, therefore, cannot meet the demands of the people who require physical rehabilitation; as the birth rate drops, this situation is likely to worsen. Therefore, the author's laboratory has been focusing on the development of rehabilitation robots for many years. The main contribution of this paper is to design suitable control algorithms to improve the rehabilitation effect of the rehabilitative training walker (RTW). In order to make the RTW has the same therapeutic effect as therapist, it must imitate the training prescription provided by therapist. Then, the RTW needs to track the trajectory designed by the therapist with high precision. However, some problems affect the precision of trajectory tracking, which makes accurate trajectory tracking impossible. Thus, we should solve these problems by improving the control algorithm, to enhance the effect of rehabilitation training. Firstly, when the RTW works together with its user, the center of gravity of the RTW will be shifted. It will further lead to some parameters in the system to change randomly. In order to solve this problem, we construct a reasonable stochastic model to describe the motion of the robot. Based on this model, we design an appropriate controller to converge the tracking error of the robot. Additionally, by designing appropriate control parameters, we make the error system is asymptotically stable. As we know, the RTW usually works In a narrow and complex environment. Therefore, In this study, three omniwheels are mounted on the RTW to allow it to move omnidirectionally; however, this also presents a challenge in the control of the robot. Unlike vehicles with standard wheels, omnidirectional vehicles suffer from noticeable jitter in the orientation angle. Most of the previous studies neglected the problem while others attempted to reduce this jitter by adjusting the gains in the controller. Here, we also investigate the structure of the omniwheels touchdown characteristics to reveal the cause of the vibration in the orientation angle. Then, we apply an adaptive technique to eliminate this vibration. A limitation of the previously published tacking methods is that they require at least the measurement of velocity on the link side or motor side. However, in robotic applications, velocity sensors are frequently omitted because of their considerable the production cost, and the size and the weight of the servo-drives. Moreover, in practical robotic systems, the velocity measurements obtained through tachometers are easily perturbed by noise. Therefore, to align with the economic and/or physical constraints, the ability to control robots without velocity measurements is of great importance. A high-gain observer is designed to take place the unmeasurable speed as the feedback information of controller. The previous trajectory tracking methods relied on the measurements of position output that are typically assumed as complete or perfectly available. Unfortunately, this assumption is not always practically plausible. Measurement information is incomplete (i.e., missing, delayed, quantized, or faded) in many engineering, biological, and chemical systems because of several reasons such as intermittent sensor failures, sensor aging, abrupt structure changes, and network induced noises that can result in performance degradation or even instability. A state observer is designed to estimate the incomplete measurements of position output. Owing to omniwheel has a complex structure (in general, an omniwheel is composed of a