<title>Development of a low-cost autonomous minihelicoptor for power line inspections</title>

摘要

Nowadays, one of the possibilities of performing inspections of electrical power lines is using visual inspections from video records taken from a camera situated on a commercial helicopter. This task is very dangerous because the flight must be done at very low altitude and close to the cables. It is also expensive because it is necessary to use a commercial helicopter and at least two qualified operators. This paper describes the system architecture and vehicle control of the prototype that is being developed by the robotic group of DISAM at “Universidad Politécnica de Madrid” for unmanned aerial inspection of electrical power lines. Artificial system vision is needed to obtain the information for the vehicle guidance by automatic detection of the cable lines and generating 3D coordinates. Navigation is performed using an inertial measurement unit to obtain the attitude of the craft. The information from the vision system is used to correct the helicopter trajectories. Helicopters exhibit highly non-linear systems with strongly coupled modes. They are very difficult to model and control. In this paper, a model of the minihelicopter is adjusted and controlled using a Linear Quadratic Gaussian (LQG) controller for pitch and roll movements and a PID one for yaw