End-to-end 2D-3D Registration between Image and LiDAR Point Cloud for Vehicle Localization
Guangming Wang, Yu Zheng, Yuxuan Wu, Yanfeng Guo, Zhe Liu, Yixiang Zhu, Wolfram Burgard, Hesheng Wang
- 发表年份
- 2023
- 访问权限
- 开放获取
摘要
Robot localization using a built map is essential for a variety of tasks including accurate navigation and mobile manipulation. A popular approach to robot localization is based on image-to-point cloud registration, which combines illumination-invariant LiDAR-based mapping with economical image-based localization. However, the recent works for image-to-point cloud registration either divide the registration into separate modules or project the point cloud to the depth image to register the RGB and depth images. In this paper, we present I2PNet, a novel end-to-end 2D-3D registration network, which directly registers the raw 3D point cloud with the 2D RGB image using differential modules with a united target. The 2D-3D cost volume module for differential 2D-3D association is proposed to bridge feature extraction and pose regression. The soft point-to-pixel correspondence is implicitly constructed on the intrinsic-independent normalized plane in the 2D-3D cost volume module. Moreover, we introduce an outlier mask prediction module to filter the outliers in the 2D-3D association before pose regression. Furthermore, we propose the coarse-to-fine 2D-3D registration architecture to increase localization accuracy. Extensive localization experiments are conducted on the KITTI, nuScenes, M2DGR, Argoverse, Waymo, and Lyft5 datasets. The results demonstrate that I2PNet outperforms the state-of-the-art by a large margin and has a higher efficiency than the previous works. Moreover, we extend the application of I2PNet to the camera-LiDAR online calibration and demonstrate that I2PNet outperforms recent approaches on the online calibration task. Source codes are released at https://github.com/IRMVLab/I2PNet.
关键词
相关论文
面向大型复杂构件的移动机器人辅助磨削技术综述
Yusen Li, Ziwei Wang, Xiangye Zhu 等 12 位作者
Robotics and Computer-Integrated Manufacturing · 2026
基于物理信息与机器学习的五轴铣削TC4钛合金刀具磨损融合预测模型
Shaoqing Qin, Lida Zhu, Yanpeng Hao 等 10 位作者
Robotics and Computer-Integrated Manufacturing · 2026
通过新型压电主动阻尼刀柄提升机器人铣削质量
Bo Li, Yuanbo Zhao, Huijie Xiao 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026
一种利用磁致非线性宽带多向被动减振器抑制机器人铣削低频颤振的新方法
Hao Li, Yuhui Yu, Rui Fu 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026