End-to-end RL Improves Dexterous Grasping Policies
Ritvik Singh, Karl Van Wyk, Pieter Abbeel, Jitendra Malik, Nathan Ratliff, Ankur Handa
- 发表年份
- 2025
- 访问权限
- 开放获取
摘要
This work explores techniques to scale up image-based end-to-end learning for dexterous grasping with an arm + hand system. Unlike state-based RL, vision-based RL is much more memory inefficient, resulting in relatively low batch sizes, which is not amenable for algorithms like PPO. Nevertheless, it is still an attractive method as unlike the more commonly used techniques which distill state-based policies into vision networks, end-to-end RL can allow for emergent active vision behaviors. We identify a key bottleneck in training these policies is the way most existing simulators scale to multiple GPUs using traditional data parallelism techniques. We propose a new method where we disaggregate the simulator and RL (both training and experience buffers) onto separate GPUs. On a node with four GPUs, we have the simulator running on three of them, and PPO running on the fourth. We are able to show that with the same number of GPUs, we can double the number of existing environments compared to the previous baseline of standard data parallelism. This allows us to train vision-based environments, end-to-end with depth, which were previously performing far worse with the baseline. We train and distill both depth and state-based policies into stereo RGB networks and show that depth distillation leads to better results, both in simulation and reality. This improvement is likely due to the observability gap between state and vision policies which does not exist when distilling depth policies into stereo RGB. We further show that the increased batch size brought about by disaggregated simulation also improves real world performance. When deploying in the real world, we improve upon the previous state-of-the-art vision-based results using our end-to-end policies.
关键词
相关论文
面向大型复杂构件的移动机器人辅助磨削技术综述
Yusen Li, Ziwei Wang, Xiangye Zhu 等 12 位作者
Robotics and Computer-Integrated Manufacturing · 2026
基于物理信息与机器学习的五轴铣削TC4钛合金刀具磨损融合预测模型
Shaoqing Qin, Lida Zhu, Yanpeng Hao 等 10 位作者
Robotics and Computer-Integrated Manufacturing · 2026
通过新型压电主动阻尼刀柄提升机器人铣削质量
Bo Li, Yuanbo Zhao, Huijie Xiao 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026
一种利用磁致非线性宽带多向被动减振器抑制机器人铣削低频颤振的新方法
Hao Li, Yuhui Yu, Rui Fu 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026