SL(C)AMma: Simultaneous Localisation, (Calibration) and Mapping With a Magnetometer Array
Thomas Edridge, Manon Kok
- 发表年份
- 2026
- 访问权限
- 开放获取
摘要
Indoor localisation techniques suffer from attenuated Global Navigation Satellite System (GNSS) signals and from the accumulation of unbounded drift by integration of proprioceptive sensors. Magnetic field-based Simultaneous Localisation and Mapping (SLAM) reduces drift through loop closures by revisiting previously seen locations, but extended exploration of unseen areas remains challenging. Recently, magnetometer arrays have demonstrated significant benefits over single magnetometers, as they can directly estimate the odometry. However, inconsistencies between magnetometer measurements negatively affect odometry estimates and complicate loop closure detection. We propose two filtering algorithms: The first focuses on magnetic field-based SLAM using a magnetometer array (SLAMma). The second extends this to jointly estimate the magnetometer calibration parameters (SLCAMma). We demonstrate, using Monte Carlo simulations, that the calibration parameters can be accurately estimated when there is sufficient orientation excitation, and that magnetometers achieve inter-sensor measurement consistency regardless of the type of motion. Experimental validation on ten datasets confirms these results, and we demonstrate that in cases where single magnetometer SLAM fails, SLAMma and SLCAMma provide good trajectory estimates with, more than 80% drift reduction compared to integration of proprioceptive sensors.
关键词
相关论文
如何缓解越野环境中语义分割的分布偏移
Ji-Hoon Hwang, Daeyoung Kim, Hyung-Suk Yoon 等 5 位作者
2026
基于原型模糊推理与证据融合的不确定性引导工业机器人可进化识别框架
Yanrun Zhou, Zihao Lei, Guangrui Wen 等 7 位作者
Robotics and Computer-Integrated Manufacturing · 2026
基于点云配准的非破坏性高分辨率涂层厚度三维扫描测量
Simon Duenser, Ivo Aschwanden, Raamadaas Krishnadas 等 5 位作者
Robotics and Computer-Integrated Manufacturing · 2026
迈向智能机器人时代:用于高级感知系统的多模态柔性触觉传感器
Sili Ding, Feng Xu, Jie Chen 等 6 位作者
Progress in Materials Science · 2026