Injector

Microbioreactor arrays with integrated mixers and fluid injectors for high-throughput experimentation with pH and dissolved oxygen control

Harry L. T. Lee, Paolo Boccazzi, Rajeev J. Ram, Anthony J. Sinskey

Citations: 134 • 2006

Needle-free delivery of macromolecules through the skin using controllable jet injectors

N. Catherine Hogan, Andrew J. Taberner, Lynette A. Jones, Ian W. Hunter

Citations: 87 • 2015

An efficient needle injection technique and radiological guidance method for percutaneous procedures

Dan Stoianovici, Jeffrey A. Cadeddu, Roger D. Demaree, Stephen A. Basile, Russell H. Taylor, Louis L. Whitcomb, W. N. Sharpe, Louis R. Kavoussi

Citations: 73 • 1997

Design and energetic characterization of a proportional-injector monopropellant-powered actuator

Kevin B. Fite, Michael Goldfarb

Citations: 48 • 2006

A Novel Method for High‐Throughput Reduction of Compounds through Automated Sequential Injection into a Continuous‐Flow Microfluidic Reactor

Richard V. Jones, Lajos Gödörházy, Dániel Szalay, János Gerencsér, György Dormán, László Ürge, Ferenç Darvas

Citations: 31 • 2005

Integrated vision and force control in suspended cell injection system: Towards automatic batch biomanipulation

Haibo Huang, Dong Sun, James K. Mills, Shuk Han Cheng

Citations: 23 • 2008

Model-Based Expert System for Design and Simulation of APS Coatings

Florin-Iuliu Trifa, Ghislain Montavon, Christian Coddet

Citations: 21 • 2007

Piezoelectric driven non-toxic injector for automated cell manipulation.

Haibo Huang, Hao Su, H. Y. Chen, James K. Mills

Citations: 20 • 2011

Force Sensing and Control in Robot-Assisted Suspended Cell Injection System

Haibo Huang, Dong Sun, Hao Su, James K. Mills

Citations: 17 • 2011

Automated normal-phase preparative high-performance liquid chromatography as a substitute for flash chromatography in the synthetic research laboratory

Peter Renold, Elisio Madero, Thomas Maetzke

Citations: 14 • 2001

A low-voltage graphene/Ag-based phase transition-controlled force actuator

Ying Huang, Wei Hu, Xinli Wang, Xiaohui Guo, Chao Hao, Yunong Zhao, Xiao Zeng, Ping Liu

Citations: 12 • 2019

Influence of accelerator grid misalignment on multi-aperture particle beam properties

D. Ćirić, J. Milnes, Elizabeth Surrey

Citations: 11 • 2003

Design and Development of a Robot Gripper for Food Industries using Coanda Effect

Elango Natarajan, Manickam Ramasamy, Chong Chi Hou, S. Ramesh

Citations: 10 • 2018

A Dynamic Solenoid Model for Fuel Injectors

Shifang Li, Thomas Nehl, Suresh Gopalakrishnan, A.M. Omekanda, Chandra Namuduri, Rashmi Prasad

Citations: 6 • 2018

PROTOTYPING MESH TURBINE WITH THE JET CONTROL SYSTEM

Yu. A. Sazonov, M. A. Mokhov, Kh. A. Tumanyan, M.A. Frankov, Nikolay Nikolaevich Balaka

Citations: 6 • 2020

PREPARATION FOR D-T PHASE OPERATION IN JET

J. R. Dean, T. Raimondi, W Riediker, A.C. Rolfe

Citations: 5 • 1986

Prototyping and Study of Jet Systems for Developing Mesh Turbomachines

Yu. A. Sazonov, M. A. Mokhov, Inna V. Gryaznova, Victoria V. Voronova, Vladimir Valentinovich Mulenko, Khoren A. Tumanyan, M.A. Frankov, Nikolay Nikolaevich Balaka

Citations: 3 • 2021

RedWater: Extraction of Water from Mars’ Ice Deposits

B. Mellerowicz, K. Zacny, Joey Palmowski, Benjamin Bradley, Leo Stolov, Bernice Yen, D. Sabahi, Lilly Ware, A. Ridilla, Huey Nguyen, David Faris, Paul J. van Susante, George Johnson, N. E. Putzig, M. H. Hecht

Citations: 3 • 2021

Single-Cell Injectoassay for ES Cell Engineering

Hideaki Matsuoka, Mikako Saito

Citations: 3 • 2009

Liquid Phase Process Characterization

Daniel A. Hickman, Daniel D. Sobeck

Citations: 3 • 2007