Fly ash

Additive manufacturing of geopolymer for sustainable built environment

Biranchi Panda, Suvash Chandra Paul, Yi Wei Daniel Tay, Ming Jen Tan

Citations: 495 • 2017

Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing

Yiwei Weng, Bing Lu, Mingyang Li, Zhixin Liu, Ming Jen Tan, Shunzhi Qian

Citations: 144 • 2018

Industrial waste fly ash cenosphere composites based broad band microwave absorber

Pritom J. Bora, Mayuri K. Porwal, K. J. Vinoy, K. Kishore, Praveen C. Ramamurthy, Giridhar Madras

Citations: 91 • 2017

Electromagnetic interference shielding effectiveness of polyaniline-nickel oxide coated cenosphere composite film

Pritom J. Bora, K. J. Vinoy, Praveen C. Ramamurthy, K. Kishore, Giridhar Madras

Citations: 75 • 2017

Evaluation of suitability for 3D printing of high performance concretes

Maria Kaszyńska, M. Hoffmann, Szymon Skibicki, A. Zieliński, Mateusz Techman, Norbert Olczyk, Tomasz Wróblewski

Citations: 48 • 2018

Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing

Alexander Lin, Yu Tan, Chi‐Hwa Wang, Harn Wei Kua, Hayden Taylor

Citations: 42 • 2020

Behavior of Pultruded Glass-Fiber-Reinforced Polymer Beam-Columns Infilled with Engineered Cementitious Composites under Cyclic Loading

Yoganantham Chinnasamy, P. S. Joanna, Karthikeyan Kothanda, G. Beulah Gnana Ananthi, Krishanu Roy

Citations: 31 • 2022

Thermomechanical behavior of textile-reinforced geopolymer concrete based on mineral-impregnated carbon-fibers (MCFs) composites

Jitong Zhao, Ameer Hamza Ahmed, Marco Liebscher, Alena Bartsch, Egor Ivaniuk, Marko Butler, Jan Kohout, Pavlína Hájková, Viktor Mechtcherine

Citations: 23 • 2024

Concentrations and source apportionment of PM10 and associated elemental and ionic species in a lignite-burning power generation area of southern Greece

G. Argyropoulos, Theodorοs Grigoratos, M. Voutsinas, Constantini Samara

Citations: 23 • 2013

Ultra-lightweight foamed concrete for an automated facade application

Thomas F. Adams, Anya Vollpracht, Johannes Haufe, Linda Hildebrand, Sigrid Brell‐Çokcan

Citations: 19 • 2018

Waste-to-energy bottom ash management: Copper recovery by electrowinning

Mónica Reig, Xanel Vecino, César Valderrama, Ignasi Sirés, José Luis Cortina

Citations: 14 • 2023

Quantitative understanding of the fly casting stroke through measurements and robotic casting

D. Anderson, Noel C. Perkins, Blin Richards

Citations: 6 • 2006

Develop Cementitious Materials Incoporating Fly Ash Cenophere For Spray-Based 3D Printing

Bing Lu

Citations: 4 • 2018

Efficient Treatment of Municipal Solid Waste in Incinerators for Energy Production

Terrence Wenga

Citations: 3 • 2023