A shape memory alloy–actuated soft crawling robot based on adaptive differential friction and enhanced antagonistic configuration

Abstract

This article presents a soft crawling robot prototype with a simple architecture inspired by inchworms. The robot functionally integrates the torso (body) and feet in a monolithic curved structure that only needs a single shape memory alloy coil and differential friction to actuate it. A novel foot configuration is proposed, which makes the two feet, with an anti-symmetrical friction layout, can be alternately anchored, to match the contraction–recovery sequence of the body adaptively. Based on the antagonistic configuration between the shape memory alloy actuator and the elastic body, a vertically auxiliary spring was adopted to enhance the interaction mechanism. Force and kinematic analysis was undertaken, focusing on the parametric design of the special foot configuration. A miniature robot prototype was then 3D-printed (54 mm in length and 9.77 g in weight), using tailored thermoplastic polyurethane elastomer as the body material. A series of experimental tests and evaluations were carried out to assess its performance under different conditions. The results demonstrated that under appropriate actuation conditions, the compact robot prototype could accomplish a relative speed of 0.024 BL/s (with a stride length equivalent to 27% of its body length) and bear a load over five times to its own weight.