Blank

Current and Future Uses of Aluminum in the Automotive Industry

Russell Long, Eric Boettcher, Dan Crawford

引用数: 97 • 2017

Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique

Georg Bardl, Andreas Nocke, Matthias Hübner, Thomas Gereke, Matthias Pooch, Martin Schulze, Henning Heuer, Marko Schiller, Richard Kupke, Marcus Klein, Chokri Cherif

引用数: 47 • 2017

A multi-arm robotic system for optimal sculpting

W.S. Owen, Elizabeth A. Croft, B. Benhabib

引用数: 30 • 2007

Influence of Geometrical Parameters, Wall Angle and Part Shape on Thickness Reduction of Single Point Incremental Forming

Valentin Oleksik

引用数: 26 • 2014

Experimental comparison of a macroscopic draping simulation for dry non-crimp fabric preforming on a complex geometry by means of optical measurement

Annegret Mallach, Frank Härtel, Frieder Heieck, Jan-Philipp Fuhr, Peter Middendorf, Μaik Gude

引用数: 26 • 2016

A geometric model of a spherical gear with a double degree of freedom

Shyue-Cheng Yang, Cha'o‐Kuang Chen, Ke-Yang Li

引用数: 25 • 2002

Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications

Xiao Ping Niu, Tim Skszek, Mark Fabischek, Alex Zak

引用数: 24 • 2014

Incremental Forming of Sheet Metal by Means of Parallel Kinematics Machines

Massimo Callegari, Andrea Gabrielli, Matteo-Claudio Palpacelli, Marco Principi

引用数: 20 • 2008

Imirok: Real-time imitative robotic arm control for home robot applications

Heng-Tze Cheng, Zheng Sun, Pei Zhang

引用数: 20 • 2011

Internal and external checks in the NOSAMS sample preparation laboratory for target quality and homogeneity

Elizabeth A. Osborne, Ann P. McNichol, A.R. Gagnon, D. L. Hutton, Glenn Jones

引用数: 19 • 1994

Investigation of 17-4PH steel microstructure and conditions of elevated temperature forming of turbine engine strut

Tomasz Trzepieciński, T. Pieją, Tomasz Malinowski, Robert Smusz, Maciej Motyka

引用数: 18 • 2017

Development of optical-heating-assisted incremental forming method for carbon fiber reinforced thermoplastic sheet—Forming characteristics in simple spot-forming and two-dimensional sheet-fed forming

Masato Okada, Tsubasa Kato, Masaaki OTSU, Hidetake Tanaka, Takuya Miura

引用数: 17 • 2018

Autonomous navigation and mapping using monocular low-resolution grayscale vision

Vidya N. Murali, Stanley T. Birchfield

引用数: 17 • 2008

Incremental Sheet Forming with an Industrial Robot – Forming Limits and Their Effect on Component Design

Lotta Lamminen

引用数: 15 • 2005

Vision-based Assembly and Inspection System for Golf Club Heads

Sainbuyan Natsagdorj, John Y. Chiang, Che-Han Su, Chih‐Chung Lin, Cheng‐Yen Chen

引用数: 15 • 2014

Incremental deformation: A literature review

Daniel Nasulea, Gheorghe Oancea

引用数: 13 • 2017

Hot Stamping and Blank Designing for a Vehicle Bumper Using Ultra High Strength Steel (UHSS)

Zhong Xiang Gui, Yi Zhang, Hong Qing Li, Ming Tu

引用数: 13 • 2013

Real‐time trajectory resolution for a two‐manipulator machining system

W.S. Owen, Elizabeth A. Croft, B. Benhabib

引用数: 12 • 2006

Spectrophotometric study of a direct determination of serum calcium

Walter L. Clark, Eugene S. Baginski, S.S. Marie, B. Zak

引用数: 11 • 1975

Evaluation of the dimensional accuracy through 3D optical scanning in incremental sheet forming

Alexandru Bârsan, Sever‐Gabriel Racz, Radu-Eugen Breaz, Mihai Crenganiș

引用数: 10 • 2023