Meta-Adaptive Beam Search Planning for Transformer-Based Reinforcement Learning Control of UAVs with Overhead Manipulators under Flight Disturbances
Hazim Alzorgan, Sayed Pedram Haeri Boroujeni, Abolfazl Razi
- 发表年份
- 2026
- 访问权限
- 开放获取
摘要
Drones equipped with overhead manipulators offer unique capabilities for inspection, maintenance, and contact-based interaction. However, the motion of the drone and its manipulator is tightly linked, and even small attitude changes caused by wind or control imperfections shift the end-effector away from its intended path. This coupling makes reliable tracking difficult and also limits the direct use of learning-based arm controllers that were originally designed for fixed-base robots. These effects appear consistently in our tests whenever the UAV body experiences drift or rapid attitude corrections. To address this behavior, we develop a reinforcement-learning (RL) framework with a transformer-based double deep Q learning (DDQN), with the core idea of using an adaptive beam-search planner that applies a short-horizon beam search over candidate control sequences using the learned critic as the forward estimator. This allows the controller to anticipate the end-effector's motion through simulated rollouts rather than executing those actions directly on the actual model, realizing a software-in-the-loop (SITL) approach. The lookahead relies on value estimates from a Transformer critic that processes short sequences of states, while a DDQN backbone provides the one-step targets needed to keep the learning process stable. Evaluated on a 3-DoF aerial manipulator under identical training conditions, the proposed meta-adaptive planner shows the strongest overall performance with a 10.2% reward increase, a substantial reduction in mean tracking error (from about 6% to 3%), and a 29.6% improvement in the combined reward-error metric relative to the DDQN baseline. Our method exhibits elevated stability in tracking target tip trajectory (by maintaining 5 cm tracking error) when the drone base exhibits drifts due to external disturbances, as opposed to the fixed-beam and Transformer-only variants.
关键词
相关论文
面向大型复杂构件的移动机器人辅助磨削技术综述
Yusen Li, Ziwei Wang, Xiangye Zhu 等 12 位作者
Robotics and Computer-Integrated Manufacturing · 2026
基于物理信息与机器学习的五轴铣削TC4钛合金刀具磨损融合预测模型
Shaoqing Qin, Lida Zhu, Yanpeng Hao 等 10 位作者
Robotics and Computer-Integrated Manufacturing · 2026
通过新型压电主动阻尼刀柄提升机器人铣削质量
Bo Li, Yuanbo Zhao, Huijie Xiao 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026
一种利用磁致非线性宽带多向被动减振器抑制机器人铣削低频颤振的新方法
Hao Li, Yuhui Yu, Rui Fu 等 6 位作者
Robotics and Computer-Integrated Manufacturing · 2026