Design and Control of a Fully Actuated Aerial Manipulator System for Measuring the Thickness of Metal Facilities

Abstract

An aerial manipulator (AM) system for thickness measurement of metal facilities is introduced in this article, which includes a fully actuated flying platform and an end effector. The AM utilizes the fully actuated advantage of the flying platform to apply controlled contact forces to the environment without the need for complex robotic manipulators. An end effector is designed, which includes an ultrasonic thickness (UT) probe mounted on a spring-damping buffer, and a coupling agent injection device allows the coupling to be applied during the inspection process. We divide the aerial inspection process into two phases: the approach phase and the contact phase. In the approach phase, we design a yaw control assistance method to ensure that the AM can contact the target surface with the desired yaw, even outside the operator’s line of sight. In the contact phase, a parallel force/velocity controller tailored to the motion characteristic of the AM is proposed to achieve precise contact force control. A switching function is designed to ensure stable transitions between the motion control and force control. The control effectiveness and the ability to measure the thickness of the metal facility of the AM system are demonstrated by practical experiments.