Directly Fabricating Soft Robotic Actuators With an Open-Source 3-D Printer

Abstract

3-D printing silicone has been a long sought for goal by roboticists. Fused deposition manufacturing (FDM) is a readily accessible and simple 3-D printing scheme that could hold the key to printing silicone. This study details an approach to 3-D print silicone elastomer through use of a thickening additive and heat curing techniques. We fabricated an identical control actuator using molding and 3-D printing techniques for comparison. By comparing the free space elongation and fixed length force of both actuators, we were able to evaluate the quality of the print. We observed that the 3-D printed linear actuator was able to perform similarly to the molded actuator, with an average error of 5.08% in actuator response, establishing the feasibility of such a system. We envision that further development of this system would contribute to the way soft robotic systems are fabricated.