Forming processes
相关论文数: 20
顶级研究者
最高引用论文
Improved SPIF performance through dynamic local heating
Joost R. Duflou, Bart Callebaut, Johan Verbert, Hans De Baerdemaeker
引用数: 133 • 2007
Some current development trends in metal-forming technology
Reiner Kopp
引用数: 78 • 1996
Incremental sheet metal forming by industrial robots
Timo Schäfer, Rolf Dieter Schraft
引用数: 78 • 2005
Two Point Incremental Forming with Two Moving Forming Tools
Horst Meier, V. Smukala, O. Dewald, Jian Zhang
引用数: 75 • 2007
Interlayer closed-loop control of forming geometries for wire and arc additive manufacturing based on fuzzy-logic inference
Yongzhe Li, Xinlei Li, Guangjun Zhang, Imré Horváth, Qinglin Han
引用数: 71 • 2020
Comparing two robot assisted incremental forming methods: incremental forming by pressing and incremental hammering
L. Vihtonen, Arnold Puzik, T. Katajarinne
引用数: 36 • 2008
A New Incremental Sheet Forming Process Based on a Flexible Supporting Die System
E. Maidagan, Joachim Zettler, Markus� Bambach, Pedro Pablo Rodríguez, Gerhard Hirt
引用数: 35 • 2007
A Process/Machine coupling approach: Application to Robotized Incremental Sheet Forming
Jérémy Belchior, Lionel Leotoing, Dominique Guines, Eric Courteille, Patrick Maurine
引用数: 30 • 2014
Incremental Sheet Metal Forming with Direct Resistance Heating Using Two Moving Tools
Horst Meier, Christian S. Magnus
引用数: 27 • 2013
Comparative Analysis of Machine Learning Methods for Predicting Robotized Incremental Metal Sheet Forming Force
Vytautas Ostaševičius, Ieva Paleviciute, Agnė Paulauskaitė-Tarasevičienė, Vytautas Jūrėnas, Darius Eidukynas, Laura Kižauskienė
引用数: 25 • 2021
Robot-Based Incremental Sheet Metal Forming – Increasing the Geometrical Accuracy of Complex Parts
Dieter Kreimeier, B. Buff, Christian S. Magnus, V. Smukala, Jinying Zhu
引用数: 24 • 2011
Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications
Xiao Ping Niu, Tim Skszek, Mark Fabischek, Alex Zak
引用数: 24 • 2014
Robot-assisted incremental sheet metal forming under the different forming condition
Swagatika Mohanty, Srinivasa Prakash Regalla, Y. V. D. Rao
引用数: 23 • 2019
Experimental force measurements in single point incremental sheet forming SPIF
Badreddine Saidi, Atef Boulila, Mahfoudh Ayadi, Rachid Nasri
引用数: 20 • 2015
Incremental Forming of Sheet Metal by Means of Parallel Kinematics Machines
Massimo Callegari, Andrea Gabrielli, Matteo-Claudio Palpacelli, Marco Principi
引用数: 20 • 2008
Robotic metal spinning-shear spinning using force feedback control
Hirohiko Arai
引用数: 20 • 2004
Rapid prototyping of sheet metal components by plasma-jet forming
A.T. Male, Y.W Chen, C. Pan, Y.M Zhang
引用数: 19 • 2003
Robotic Metal Spinning-Forming Non-axisymmetric Products Using Force Control-
Hirohiko Arai
引用数: 18 • 2006
3D roll forming center for automotive applications
Albert Sedlmaier, Thomas Dietl
引用数: 18 • 2018
Development of optical-heating-assisted incremental forming method for carbon fiber reinforced thermoplastic sheet—Forming characteristics in simple spot-forming and two-dimensional sheet-fed forming
Masato Okada, Tsubasa Kato, Masaaki OTSU, Hidetake Tanaka, Takuya Miura
引用数: 17 • 2018