Extrusion

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

Clément Gosselin, R. Duballet, Philippe Roux, Nadja Gaudillière, Justin Dirrenberger, P. Morel

引用数: 924 • 2016

3D-printed self-healing hydrogels via Digital Light Processing

Matteo Caprioli, Ignazio Roppolo, Annalisa Chiappone, Liraz Larush, Candido Fabrizio Pirri, Shlomo Magdassi

引用数: 318 • 2021

Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing

Jolie Breaux Frketic, Tarik Dickens, Subramanian Ramakrishnan

引用数: 309 • 2017

3D‐Printed Anisotropic Polymer Materials for Functional Applications

Jiayao Chen, Xiaojiang Liu, Yujia Tian, Wei Zhu, Chunze Yan, Yusheng Shi, Ling Bing Kong, H. Jerry Qi, Kun Zhou

引用数: 269 • 2021

Programmed Deformations of 3D‐Printed Tough Physical Hydrogels with High Response Speed and Large Output Force

Si Yu Zheng, Yangyang Shen, Fengbo Zhu, Jun Yin, Jin Qian, Jianzhong Fu, Zi Liang Wu, Qiang Zheng

引用数: 238 • 2018

Classification of building systems for concrete 3D printing

R. Duballet, Olivier Baverel, Justin Dirrenberger

引用数: 216 • 2017

Characterization of the mesostructure of fused‐deposition acrylonitrile‐butadiene‐styrene materials

José F. Rodrı́guez, James P. Thomas, John E. Renaud

引用数: 216 • 2000

Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils

Louis Laberge Lebel, Brahim Aïssa, My Alı El Khakani, Daniel Therriault

引用数: 207 • 2009

Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)

Harald Kloft, H. Krauß, Norman Hack, Eric Herrmann, Stefan Neudecker, Patrick A. Varady, Dirk Lowke

引用数: 204 • 2020

3D printing for construction based on a complex wall of polymer-foam and concrete

Benoît Furet, Philippe Poullain, Sébastien Garnier

引用数: 183 • 2019

Extrusion printing of ionic–covalent entanglement hydrogels with high toughness

Shannon E. Bakarich, Marc in het Panhuis, Stephen Beirne, Gordon G. Wallace, Geoffrey M. Spinks

引用数: 174 • 2013

Computer vision for real-time extrusion quality monitoring and control in robotic construction

Ali Kazemian, Xiao Yuan, Omid Davtalab, Behrokh Khoshnevis

引用数: 156 • 2019

4D printing of highly printable and shape morphing hydrogels composed of alginate and methylcellulose

Jiahui Lai, Xinliang Ye, Jia Liu, Chong Wang, Junzhi Li, Xiang Wang, Mingze Ma, Min Wang

引用数: 155 • 2021

Additive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review

Halil Tetik, Ying Wang, Xiao Sun, Daxian Cao, Nasrullah Shah, Hongli Zhu, Fang Qian, Dong Lin

引用数: 150 • 2021

Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures

Qinghua Wu, Daniel Therriault, Marie‐Claude Heuzey

引用数: 141 • 2018

A Study into the Effect of Different Nozzles Shapes and Fibre-Reinforcement in 3D Printed Mortar

Pshtiwan Shakor, Shami Nejadi, Gavin Paul

引用数: 135 • 2019

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Henry H. Hwang, Wei Zhu, Grace Victorine, Natalie Lawrence, Shaochen Chen

引用数: 131 • 2017

Fabrication using a rapid prototyping system and in vitro characterization of PEG-PCL-PLA scaffolds for tissue engineering

Md Enamul Hoque, Dietmar W. Hutmacher, Wei Feng, Suming Li, Ming‐Hsi Huang, Michel Vert, Yee Shan Wong

引用数: 128 • 2005

Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing

J. Paulo Davim, Leonardo R. Silva, António Festas, Alexandre Mendes Abrão

引用数: 118 • 2008

Direct 3D printing of silicone elastomer soft robots and their performance comparison with molded counterparts

Osman Doğan Yirmibeşoğlu, John Morrow, Steph Walker, Walker Gosrich, Reece Canizares, Han Sung Kim, Uranbileg Daalkhaijav, Chloë Fleming, Callie Branyan, Yiğit Mengüç

引用数: 115 • 2018