Curing (chemistry)

Self-Healing Polyurethane Elastomers Based on a Disulfide Bond by Digital Light Processing 3D Printing

Xinpan Li, Ran Yu, Yangyang He, Ying Zhang, Xin Yang, Xiaojuan Zhao, Wei Huang

引用数: 341 • 2019

Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers

Luyu Zhou, Qing Gao, Jianzhong Fu, Qian‐Yong Chen, Jia‐pei Zhu, Yuan Sun, Yong He

引用数: 231 • 2019

Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils

Louis Laberge Lebel, Brahim Aïssa, My Alı El Khakani, Daniel Therriault

引用数: 207 • 2009

Rugged Soft Robots using Tough, Stretchable, and Self‐Healable Adhesive Elastomers

Matthew Tan, Gurunathan Thangavel, Pooi See Lee

引用数: 172 • 2021

Piezocapacitive Flexible E‐Skin Pressure Sensors Having Magnetically Grown Microstructures

Waqas Asghar, Fali Li, Youlin Zhou, Yuanzhao Wu, Zhe Yu, Shengbin Li, Daxiu Tang, Xintong Han, Jie Shang, Yiwei Liu, Run‐Wei Li

引用数: 131 • 2020

Multimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator

Zhongying Ji, Changyou Yan, Bo Yu, Xiaolong Wang, Feng Zhou

引用数: 129 • 2017

Reversible Wet‐Adhesive and Self‐Healing Conductive Composite Elastomer of Liquid Metal

Danfeng Pei, Shanyu Yu, Ping Liu, Yongpeng Wu, Xiaofang Zhang, Yijun Chen, Mingjie Li, Chaoxu Li

引用数: 105 • 2022

Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite

Baohui Shi, Yuanyuan Shang, Ping Zhang, Angela P. Cuadros, Jing Qu, Baozhong Sun, Bohong Gu, Tsu−Wei Chou, Kun Fu

引用数: 95 • 2020

4D printing of polyurethane paint-based composites

Jheng‐Wun Su, Wenxin Gao, Khoinguyen Trinh, Stuart M. Kenderes, Ezgi Pulatsu, Cheng Zhang, Alan Whittington, Mengshi Lin, Jian Lin

引用数: 80 • 2019

Development of a Robotic Arm Based Hydrogel Additive Manufacturing System for In-Situ Printing

Xiao Li, Qin Lian, Dichen Li, Hua Jun Xin, Shuhai Jia

引用数: 63 • 2017

Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing

Rouhollah D. Farahani, Louis Laberge Lebel, Daniel Therriault

引用数: 58 • 2014

Facile Photo and Thermal Two‐Stage Curing for High‐Performance 3D Printing of Poly(Dimethylsiloxane)

Zhongying Ji, Dong Jiang, Xiaoqin Zhang, Yuxiong Guo, Xiaolong Wang

引用数: 54 • 2020

Dynamic thermomechanical modeling and simulation of the design of rapid free-form 3D printing processes with evolutionary machine learning

Tarek I. Zohdi

引用数: 49 • 2017

3D Printing of Bismaleimides: From New Ink Formulation to Printed Thermosetting Polymer Objects

I. Gouzman, Nurit Atar, Eitan Grossman, Ronen Verker, Asaf Bolker, Mariana Pokrass, Shai Sultan, Omer Sinwani, Annika Wagner, Thomas Lück, Christian Seifarth

引用数: 45 • 2019

Additive manufacturing of carbon fiber-reinforced thermoset composites via in-situ thermal curing

Carter F Dojan, Morteza Ziaee, Alireza Masoumipour, Samuel J Radosevich, Mostafa Yourdkhani

引用数: 44 • 2025

Additive manufacturing of continuously reinforced thermally curable thermoset composites with rapid interlayer curing

Kaiyue Deng, Chunyan Zhang, Kun Fu

引用数: 39 • 2023

Experimental and statistical analysis of robotic 3D printing process parameters for continuous fiber reinforced composites

Ahmet İpekçi, Bülent Eki̇ci̇

引用数: 38 • 2021

Digital light processing 4D printing multilayer polymers with tunable mechanical properties and shape memory behavior

Shuping Huang, Hang Zhang, Jie Sheng, Emmanuel. Agyenim-Boateng, Cheng Wang, Hongwei Yang, Jie’an Wei, Gaoqiang Jiang, Jianzhong Zhou, Jinzhong Lu, Junhui Zhang

引用数: 32 • 2023

Ductile Shape-Memory Polymer Composite with Enhanced Shape Recovery Ability

Kaiyuan Peng, Yao Zhao, Shima Shahab, Reza Mirzaeifar

引用数: 31 • 2020

Hybrid additive manufacturing (3D printing) and characterization of functionally gradient materials via in situ laser curing

Santosh Kumar Parupelli, Salil Desai

引用数: 28 • 2020