Light Coils: MRI with Fully Optical Data and Power Transmission

摘要

In MRI, dense receiver coil arrays with a high number of coil elements are used to efficiently detect and encode the signal. Further increasing the number of coils is hampered by electrical cabling and massive electronics that introduce electromagnetic coupling, integration complexity and even safety constraints. Here we introduce the novel Light Coils concept, a fully optical MRI receive architecture in which data transmission, front-end power delivery, and coil detuning are all implemented optically, thereby reducing the massive galvanic cabling to a few optical fibers. For signal encoding, Mach-Zehnder modulators (MZM) are used to convert the MR signal from each coil onto a C-band optical carrier. The preamplifiers are driven via a power-over-fiber (PoF) system that uses a high-efficiency photovoltaic (PV) cell for optical-to-electrical power conversion. A pulse-sequence-triggered optical path controls active detuning. Jointly optimizing modulator bias, optical power and front-end gain under realistic receiver chain conditions, Light Coils can match the signal-to-noise ratio (SNR) of conventional RF coil systems with galvanic cables at MZM input powers of 5-10mW and photonic power converter inputs of 80-100mW. At a clinical 3T MRI system, we show in vivo human brain imaging with a single-channel Light Coil element with an image quality and SNR comparable to a conventional coaxial readout using the identical coil element. Extending the concept to a four-channel array using dense wavelength-division multiplexing over a single fiber, we demonstrate wavelength-selective routing with inter-channel optical isolation exceeding 28dB, reduced noise correlation compared with the galvanic reference, and parallel imaging. These results establish a scalable route towards lightweight, modular, and potentially ultra-dense MRI receive arrays based on integrated photonics and power-over-fiber.