Polypropylene

Neural network model describing the temperature- and rate-dependent stress-strain response of polypropylene

Benoit Jordan, Maysam B. Gorji, Dirk Mohr

Citations: 145 • 2020

Superhydrophobic Polyolefin Surfaces:  Controlled Micro- and Nanostructures

Esa Puukilainen, Tiina Rasilainen, Mika Suvanto, Tapani A. Pakkanen

Citations: 134 • 2007

Micro–Micro Hierarchy Replacing Micro–Nano Hierarchy: A Precisely Controlled Way To Produce Wear-Resistant Superhydrophobic Polymer Surfaces

Eero Huovinen, Janne T. Hirvi, Mika Suvanto, Tapani A. Pakkanen

Citations: 110 • 2012

Shear Adhesion Strength of Thermoplastic Gecko-Inspired Synthetic Adhesive Exceeds Material Limits

Andrew G. Gillies, Ronald S. Fearing

Citations: 58 • 2011

Investigation and demonstration of the durability of air plasma pre-treatment on polypropylene automotive bumpers

Rebecca Stewart, Vannessa Goodship, F.J. Guild, Martyn Green, Jeff Farrow

Citations: 51 • 2005

A Pillow-Shaped 3D Hierarchical Piezoresistive Pressure Sensor Based on Conductive Silver Components-Coated Fabric and Random Fibers Assembly

Mingwei Tian, Yunjing Lu, Lijun Qu, Shifeng Zhu, Xiansheng Zhang, Shaojuan Chen

Citations: 45 • 2019

Additive manufacturing of polypropylene micro and nano composites through fused filament fabrication for automotive repair applications

Fareed Tamaddoni Jahromi, Mostafa Nikzad, Krishnamurthy Prasad, Johan Norén, Mats Isaksson, Alaleh Arian, Igor Sbarski

Citations: 39 • 2022

Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum

Sebastian Hertle, Tobias Kleffel, Andreas Wörz, Dietmar Drummer

Citations: 34 • 2020

Anisotropically microstructured and micro/nanostructured polypropylene surfaces

Tiina Rasilainen, Mika Suvanto, Tapani A. Pakkanen

Citations: 33 • 2009

Increasing Sample Preparation Throughput Using Monolithic Methacrylate Polymer as Packing Material for 96‐Tip Robotic Device

Zeki Altun, L. G. Blomberg, Mohamed Abdel‐Rehim

Citations: 32 • 2006

Integrating Reactors and Catalysts through Three‐Dimensional Printing: Efficiency and Reusability of an Impregnated Palladium on Silica Monolith in Sonogashira and Suzuki Reactions

Antonio Sánchez Díaz-Marta, Susana Yáñez, Eliana Lasorsa, Patrícia Quintans Cundines Pacheco, Carmen R. Tubío, J. Rivas, Yolanda Piñeiro, Manuel Gómez, Manuel Amorín, Francisco Guitián, Alberto Coelho

Citations: 32 • 2020

Polypropylene-Carbon Nanofiber Composites as Strain-Gauge Sensor

J. G. Rocha, Antonio J. Paleo, F. W. J. van Hattum, S. Lanceros‐Méndez

Citations: 26 • 2013

Multifunctional Conductive Paths Obtained by Laser Processing of Non-Conductive Carbon Nanotube/Polypropylene Composites

Federico Cesano, Mohammed Jasim Uddin, Alessandro Damin, Domenica Scarano

Citations: 23 • 2021

Robotic tow placement for local reinforcement of glass mat thermoplastics (GMTs)

M. D. Wakeman, Per‐Ola Hagstrand, F. Bonjour, P.‐E. Bourban

Citations: 19 • 2002

Modification of polypropylene surfaces with micropits and hierarchical micropits/nanodepressions

Tiina Rasilainen, Anna Kirveslahti, Pauliina Nevalainen, Mika Suvanto, Tapani A. Pakkanen

Citations: 19 • 2010

Curved hierarchically micro–micro structured polypropylene surfaces by injection molding

Kati Mielonen, Mika Suvanto, Tapani A. Pakkanen

Citations: 17 • 2016

Superhydrophobic hierarchical three-level structures on 3D polypropylene surfaces

Kati Mielonen, Tapani A. Pakkanen

Citations: 15 • 2018

Smart Devices Based on the Soft Actuator with Nafion-Polypropylene-PDMS/Graphite Multilayer Structure

Wei Yao, Shihao Li, Xiaofan Zhang, Yanjun Fu, Kejian Chen

Citations: 14 • 2020

Finite element modelling and testing of an injection moulded generic tow reinforced structure

Niklas Jansson, Per‐Ola Hagstrand, M. D. Wakeman

Citations: 12 • 2005

Forming Shaped/Molded Structures by Integrating Meltblowing and Robotic Technologies

Raoul Farer, Abdel‐Fattah M. Seyam, Tushar K. Ghosh, Subhash K. Batra, E. Grant, Gordon Lee

Citations: 12 • 2003