Inert gas

Quality and productivity improvement in aluminium alloy thin sheet welding using alternating current pulsed metal inert gas welding system

Hongjun Tong, Tomoyuki Ueyama, Shoji Harada, Masao Ushio

Citations: 90 • 2001

Computational modelling of shaped metal deposition

Andrés Anca, Vı́ctor D. Fachinotti, Gustavo A. Escobar-Palafox, Alberto Cardona

Citations: 86 • 2010

Real-time monitoring of welding path in pulse metal-inert gas robotic welding using a dual-microphone array

Na Lv, Gu Fang, XU Yan-ling, Zhao Hui, Shanben Chen

Citations: 25 • 2016

Evaporation phenomena of magnesium from droplet at welding wire tip in pulsed MIG arc welding of aluminium alloys

Hiroshi Nishimura, Seiji KATAYMA, Masami Mizutani

Citations: 21 • 2011

Optimization of the A-TIG welding for stainless steels

Maja Jurica, Zoran Kožuh, Ivica Garašić, Mladen Bušić

Citations: 19 • 2018

Arc welding Control for Shaped Metal Deposition Process

Filippo Bonaccorso, Luciano Cantelli, Giovanni Muscato

Citations: 16 • 2011

Electrowinning

Mark E. Schlesinger, Matthew J. King, Kathryn C. Sole, William G. Davenport

Citations: 14 • 2011

Optimization and influence of process parameters of dissimilar SS304L – SS430 joints produced by Robotic TIG welding

M. Venkata Ramana, Bikash Kumar, M. Krishna, M. Venkateshwar Rao, Vinod Kumar

Citations: 13 • 2019

Influence of Duty Ratio and Current Mode on Robot 316L Stainless Steel Arc Additive Manufacturing

Ping Yao, Hongyan Lin, Wei Wu, Heqing Tang

Citations: 12 • 2021

Development and control of shaped metal deposition process using tungsten inert gas arc heat source in additive layered manufacturing

Adnan A. Ugla, Oğuzhan Yılmaz, Ahmed R. J. Almusawi

Citations: 12 • 2016

Adaptive control of pulsed MIG welding using image processing systems

M. Yamamoto, Yasuyoshi Kaneko, Kensuke Fujii, Tetsuo KUMAZAWA, K. Ohshima, G. Alzamora, Takefumi Kubota, Fumio Ozaki, S. Anzai

Citations: 12 • 2003

Flame Extinguishment by a Prototype of an Aerial Extinguisher with an Inert Gas Capsule

Yasushi Iwatani, Hiroyuki Torikai

Citations: 10 • 2014

Optimization of parameters involved in robotic MIG welding process based on quality responses

Kriya Kumaran, S. Oliver Nesa Raj

Citations: 10 • 2018

Controlled microstructure of arc-sprayed metal shells

Paul S. Fussell, H. O. K. Kirchner, Friedrich Prinz, L.E. Weiss

Citations: 10 • 1994

Development and control of an aerial extinguisher with an inert gas capsule

Satoshi Ogawa, Shinya Kudo, Masahiro Koide, Hiroyuki Torikai, Yasushi Iwatani

Citations: 9 • 2014

Transparent Conducting Films in the Zn--Sn--O Tie Line

A. Kurz, Michel A. Aegerter

Citations: 8 • 2004

Experimental Study of Single Pass Welding Parameter Using Robotic Metal Inert Gas (MIG) Welding Process

Mohd Hairizal Osman, N. F. Nasrudin, Abdullah Shariff, Mohammad Khalid Wahid, Mohd Nazri Ahmad, Nurul Ain Maidin, Ridhwan Jumaidin, Mohd Hidayat Ab Rahman

Citations: 8 • 2020

Transparent conducting films in the Zn-Sn-O tie line

A. Kurz, Michel A. Aegerter

Citations: 7 • 2004

Effect of shielding gas on microstructure and mechanical properties in AA6061-T6 alloy MIG welding

Eren Yılmaz, Fehim Fındık

Citations: 6 • 2022

Development of adaptive control system for alternating current pulsed metal inert gas welding parameters

Hongjun Tong, Tetsuo ERA, Tomoyuki Ueyama

Citations: 5 • 2002