Bead

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

Donghong Ding, Zengxi Pan, Dominic Cuiuri, Huijun Li

Citations: 547 • 2014

High-throughput SNP genotyping on universal bead arrays

Richard Shen, Jian‐Bing Fan, Derek Campbell, Weihua Chang, Jing Chen, Dennis Doucet, Jo Yeakley, Marina Bibikova, Eliza Wickham Garcia, Celeste McBride, Frank J. Steemers, Francisco García‐García, Bahram G. Kermani, Kevin L. Gunderson, Arnold Oliphant

Citations: 435 • 2005

Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing

Jun Xiong, Guangjun Zhang, Hongming Gao, Lin Wu

Citations: 231 • 2012

Sensitivity analysis for process parameters in GMA welding processes using a factorial design method

I.S. Kim, Kwang-Jae Son, Yan Yang, Prasad K.D.V. Yaragada

Citations: 170 • 2003

Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process

Yong Cao, Sheng Zhu, Xiubing Liang, Wanglong Wang

Citations: 159 • 2010

Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics

Ahmet Yıldız, Kemal Davut, Barış Koç, Oğuzhan Yılmaz

Citations: 153 • 2020

SISCAPA Peptide Enrichment on Magnetic Beads Using an In-line Bead Trap Device

N. Leigh Anderson, Angela Jackson, Derek Smith, Darryl B. Hardie, Christoph H. Borchers, Terry W. Pearson

Citations: 143 • 2009

Real-Time MRI-Based Control of a Ferromagnetic Core for Endovascular Navigation

Samer Tamaz, Richard Gourdeau, Arnaud Chanu, Jean‐Baptiste Mathieu, Sylvain Martel

Citations: 126 • 2008

Chemotactic steering of bacteria propelled microbeads

Dongwook Kim, Albert Liu, Eric Diller, Metin Sitti

Citations: 114 • 2012

A study on prediction of bead height in robotic arc welding using a neural network

I.S Kim, Joon Sik Son, C.E Park, C.W Lee

Citations: 101 • 2002

Adaptive process control of wire and arc additive manufacturing for fabricating complex-shaped components

Fang Li, Shujun Chen, Zhaoyang Wu, Zhihong Yan

Citations: 85 • 2018

Multi-bead overlapping model with varying cross-section profile for robotic GMAW-based additive manufacturing

Zeqi Hu, Xunpeng Qin, Yifeng Li, Jiuxin Yuan, Qiang Wu

Citations: 84 • 2019

Discovering Novel Interactions at the Nuclear Pore Complex Using Bead Halo

Samir S. Patel, Michael Rexach

Citations: 82 • 2007

A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layers

Yongzhe Li, Qinglin Han, Guangjun Zhang, Imré Horváth

Citations: 79 • 2018

Evaluation of genetic programming-based models for simulating bead dimensions in wire and arc additive manufacturing

Biranchi Panda, K. Shankhwar, Akhil Garg, M. M. Savalani

Citations: 74 • 2016

Interlayer closed-loop control of forming geometries for wire and arc additive manufacturing based on fuzzy-logic inference

Yongzhe Li, Xinlei Li, Guangjun Zhang, Imré Horváth, Qinglin Han

Citations: 71 • 2020

Homogeneous Cell- and Bead-Based Assays for High Throughput Screening Using Fluorometric Microvolume Assay Technology

Sheri Miraglia, Elana Swartzman, Julia Mellentin-Michelotti, Lolita Evangelista, Christopher J. Smith, Iwan Gunawan, Kenton L. Lohman, E. Matilda Goldberg, Bala S. Manian, Pau-Miau Yuan

Citations: 67 • 1999

Development and Control of an Automated Robotic Weld Bead Grinding System

Daniel E. Whitney, A. C. Edsall, A. B. Todtenkopf, Thomas R. Kurfess, Allan Robert Tate

Citations: 66 • 1990

A multiplexed PCR-coupled liquid bead array for the simultaneous detection of four biothreat agents

W. J. Wilson, A Erler, Shanavaz Nasarabadi, Evan W. Skowronski, Paula Imbro

Citations: 66 • 2005

A Three-Dimensional Magnetic Tweezer System for Intraembryonic Navigation and Measurement

Xian Wang, Mengxi Luo, Han Wu, Zhuoran Zhang, Jun Liu, Zhensong Xu, W. R. Johnson, Yu Sun

Citations: 63 • 2017