Other
olixSense™ X1 Pro
by olive®
Specifications
- Depth
- 40 mm
- Weight g
- 36
- Width
- 40 mm
- Height
- 10 mm
- Ip rating
- IP52
- Latency (ms)
- < 5
- Speed gbps
- 0.5
- Cable length m
- 2.5
- Roll pitch (deg)
- < 0.5
- Update rate hz
- 1000
- Latency micros
- 250
- Yaw heading (deg)
- < ±2.5
- Temperature max c
- 85
- Temperature min c
- -20
- Gyroscope range dps
- 0
- Accelerometer range g
- 0
Overview
The olixSense™ X1 Pro is an Inertial Measurement Unit with embedded AI sensor fusion. It features triple-MEMS redundancy, native ROS 2 support, and a USB Type-C interface. It delivers roll/pitch accuracy <0.5°, yaw heading <±2.5°, motion-to-message latency <5 ms, and update rate up to 1000 Hz. The compact 40x40x10 mm aluminum housing weighs 36g and is IP52-rated, operating from -20°C to +85°C. It supports Ethernet-over-USB for plug-and-play connectivity and includes a WebGUI for configuration and OTA updates.
Key features
- ▸Triple-redundant MEMS accelerometers, gyroscopes, and magnetometer
- ▸Embedded AI sensor fusion with Extended Kalman Filtering
- ▸Native ROS 2 support with DDS protocol, no drivers needed
- ▸Ultra-low latency under 1.0 ms, update rate up to 1000 Hz
- ▸Compact 40 x 40 x 10 mm aluminum housing, only 36g
- ▸IP52-rated, operates from -20°C to +85°C
- ▸Plug-and-play Ethernet-over-USB Type-C interface
- ▸Built-in WebGUI for live data visualization and OTA updates
- ▸Dynamic self-calibration and continuous bias compensation
- ▸Supports multiple sensors in one system via NTP synchronization