Compressive strength

Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair

Xin Liu, Mohamed N. Rahaman, Gregory E. Hilmas, B. Sonny Bal

引用数: 219 • 2013

3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties

Kequan Yu, Wes McGee, Tsz Yan Ng, He Zhu, Victor C. Li

引用数: 211 • 2021

Alumina–aluminum interpenetrating-phase composites with three-dimensional periodic architecture

Christopher W. San Marchi, M. Kouzeli, R. Rao, Jennifer A. Lewis, David C. Dunand

引用数: 153 • 2003

On the structural, mechanical, and biodegradation properties of HA/β-TCP robocast scaffolds

Manuel Houmard, Qiang Fu, Martin Genet, Eduardo Saiz, Antoni P. Tomsia

引用数: 113 • 2013

Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair

Aylin M. Deliormanlı, Mohamed N. Rahaman

引用数: 108 • 2012

Evolution of strength and failure of SCC during early hydration

Linus K. Mettler, Falk K. Wittel, Robert J. Flatt, Hans J. Herrmann

引用数: 107 • 2016

Yield stress and viscosity equations for mortars and self-consolidating concrete

Jean-Yves Petit, Éric Wirquin, Yannick Vanhove, Kamal H. Khayat

引用数: 105 • 2007

Mechanical reinforcement of granular hydrogels

Alvaro Charlet, Francesca Bono, Esther Amstad

引用数: 75 • 2022

Cementitious composites blending with high belite sulfoaluminate and medium-heat Portland cements for largescale 3D printing

Wang Li, Hui Ma, Zhijian Li, Guowei Ma, Jingyuan Guan

引用数: 72 • 2021

Design strategy for hierarchical structure of carbon black on microporous elastomer surface toward stretchable and compressive strain sensors

Tao Gong, Jin Jia, Xiaorong Sun, Wu‐Di Li, Kai Ke, Rui‐Ying Bao, Wei Yang

引用数: 57 • 2023

Graphene aerogels that withstand extreme compressive stress and strain

Chenwei Li, Meichun Ding, Baoqing Zhang, Xin Qiao, Chenyang Liu

引用数: 56 • 2018

Effects of degradation and porosity on the load bearing properties of model hydroxyapatite bone scaffolds

Jennifer Dellinger, Abigail M. Wojtowicz, Russell D. Jamison

引用数: 56 • 2006

Porous PDMS force sensitive resistors

M. G. King, Adam J. Baragwanath, Mark C. Rosamond, David Wood, Andrew J. Gallant

引用数: 51 • 2009

Transparent, highly-stretchable, adhesive, and ionic conductive composite hydrogel for biomimetic skin

Shaojun Chen, Jiapeng Xie, Jiaoshi Liu, Xiaoting Huang, Cai Wang

引用数: 50 • 2020

Evaluation of suitability for 3D printing of high performance concretes

Maria Kaszyńska, M. Hoffmann, Szymon Skibicki, A. Zieliński, Mateusz Techman, Norbert Olczyk, Tomasz Wróblewski

引用数: 48 • 2018

Creation of bioactive glass (13–93) scaffolds for structural bone repair using a combined finite element modeling and rapid prototyping approach

Wei Xiao, Mohsen Asle Zaeem, B. Sonny Bal, Mohamed N. Rahaman

引用数: 44 • 2016

Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing

Alexander Lin, Yu Tan, Chi‐Hwa Wang, Harn Wei Kua, Hayden Taylor

引用数: 42 • 2020

Robotic spray coating of self-sensing metakaolin geopolymer for concrete monitoring

Jack McAlorum, Marcus Perry, Christos Vlachakis, L. Biondi, Brenden Lavoie

引用数: 39 • 2020

Behavior of Pultruded Glass-Fiber-Reinforced Polymer Beam-Columns Infilled with Engineered Cementitious Composites under Cyclic Loading

Yoganantham Chinnasamy, P. S. Joanna, Karthikeyan Kothanda, G. Beulah Gnana Ananthi, Krishanu Roy

引用数: 31 • 2022

Strength test of 3D printed artificial rock mass with pre-existing fracture

Youyu Wang, Wang Li, Fanfei Meng, Kang Chen

引用数: 30 • 2020