Improved charging and strain rates by laser perforating polypyrrole actuator electrodes

摘要

Conducting polymer actuators generate significant strains (1%–10%) when driven at low voltages, and are muscle-like in their linear deformation, mechanical compliance, silent operation, and energy density. However, slow electrochemical processes have hindered widespread application. To operate electroactive polymer actuators in practical applications such as soft robotics, the speed of energy delivery is often important. Recent work has achieved very fast actuation by using very thin films and blending of materials of high ionic conductivity with conducting polymers, allowing fast insertion of ions. Here we make microscopic arrays of holes in relatively thick, easy to handle conducting polymer films in order to speed ion insertion and actuation. A single-step, top-down, non-contact and template-free approach is used, employing femto and picosecond lasers to texturize polypyrrole based actuators while preserving the stress and strain output. A wide range of hole separations and diameters (pitch/diameter from 9.75/5.17 μm to 24.7/13.2 μm) are explored to reduce the ion diffusion path length in the bulk polymer. This led to a speed increase of between 2 and 30 times. A finite element model based on diffusion shows similar improvements, suggesting that the reduced distance of mass transport achieved by laser perforation is the key to faster response times in the thick electrodes used. The demonstrated ability to increase rate of response using micromachined electrodes is potentially applicable to batteries and supercapacitors.