WingtraOne Gen IV
The WingtraOne Gen IV is a vertical takeoff and landing (VTOL) fixed-wing drone designed for professional surveying and mapping applications. It executes pre-planned survey missions autonomously, including takeoff, flight, and landing, with reported coverage up to 550 hectares per flight and 59-minute flight endurance.
Overview and Use Cases
The WingtraOne Gen IV is a VTOL fixed-wing drone developed by Wingtra, a company founded in 2014 with origins in ETH Zurich. The platform is designed for professional surveying and mapping operations. The drone operates autonomously, executing pre-planned survey missions without direct human control during flight execution. Operators plan missions and monitor progress from the ground using software tools.
Key Capabilities
- Autonomous mission execution including vertical takeoff, flight plan navigation, and landing
- Survey flight planning and ground-based mission monitoring
- Reported coverage of up to 550 hectares per flight
- Repeatable accuracy of 3 centimeters (vendor specification)
- Full flight autonomy without manual piloting during mission execution
Specifications
- Flight Speed: 16 m/s (36 mph)
- Maximum Flight Duration: Up to 59 minutes per flight
- Aircraft Type: Vertical takeoff and landing (VTOL) fixed-wing configuration
Applications
The WingtraOne Gen IV is employed in professional surveying and mapping operations. Its autonomous capabilities and extended flight endurance support large-area survey missions typical of land surveying, agricultural monitoring, and geographic mapping projects.
Related entries
RobotRelay Delivery Robot
The Relay Delivery Robot is an autonomous indoor delivery robot developed by Relay Robotics (formerly known as Savioke), designed primarily for hospitality and healthcare environments. It navigates hotel corridors and hospital hallways independently, rides elevators without human assistance, and delivers guest amenities, medications, linens, and other supplies directly to rooms or designated drop-off points. Relay is one of the most widely deployed service robots in its category, reportedly completing over one million lifetime deliveries with a publicly cited success rate of approximately 99.8%. With a cargo capacity of around 10 gallons, the robot is compact enough to operate in busy public spaces while carrying a meaningful payload of everyday supplies.
2,664 views
RobotSpot
Spot is a four-legged autonomous robot developed by Boston Dynamics, a robotics company headquartered in Waltham, Massachusetts. Designed for inspection, security, and data collection in complex or hazardous environments, Spot can navigate stairs, rough terrain, and confined spaces that are inaccessible to wheeled robots. It is commercially available and has been deployed across industries including utilities, oil and gas, construction, and public safety. Spot supports a modular payload system that accommodates thermal cameras, pan-tilt-zoom (PTZ) cameras, lidar units, methane sensors, and other mission-specific hardware. Boston Dynamics also offers the Orbit fleet-management software platform, enabling operators to schedule autonomous inspection routes, aggregate sensor data, and manage multiple Spot units from a central interface. The robot is widely regarded as one of the most capable and commercially mature legged robots on the market.
1,148 views
RobotRealSense Depth Camera D455
The RealSense Depth Camera D455 is a stereoscopic active-infrared depth camera belonging to Intel's D400 series, designed to capture high-fidelity depth data for robotics, autonomous mobile robots (AMRs), drones, and computer-vision applications. It features a 95 mm stereo baseline — the widest in the D400 lineup at the time of its introduction — which reportedly enables depth error of under 2% at ranges up to approximately 4 metres. Originally developed under the Intel RealSense brand, the D455 and related products were later spun off as part of an independent RealSense business unit following Intel's restructuring of the division around 2021–2022. The camera is widely adopted in research, industrial automation, and humanoid-robot development owing to its compact USB-powered form factor, open SDK support, and relatively accessible price point.
540 views
Rosie 2.0
The Rosie 2.0 is a commercial-grade autonomous robot vacuum developed by Tailos, designed to handle large-scale floor cleaning in business and institutional environments. It is offered in a two-pack configuration, allowing facilities to deploy multiple units simultaneously for broader coverage and more efficient cleaning cycles. Built to commercial durability standards, the Rosie 2.0 combines intelligent navigation with powerful suction technology to reduce reliance on manual labor and improve facility maintenance consistency. It targets businesses, hospitality venues, retail spaces, and other high-traffic environments where reliable, automated cleaning is a priority.
468 views