Acicular ferrite

Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing

Mehran Rafieazad, Mahya Ghaffari, Alireza Vahedi Nemani, Ali Nasiri

Citations: 226 • 2019

Effect of Torch Weaving on the Microstructure, Tensile and Impact Resistances, and Fracture of the HAZ and Weld Bead by Robotic GMAW Process on ASTM A36 Steel

Isidro Guzmán Flores, B. Vargas-Arista, Juan Jose Gasca-Dominguez, Celso Cruz, Marco Antonio González-Albarrán, Joaquin del Prado-Villasana

Citations: 26 • 2017

Microstructural analysis and mechanical behavior of the HAZ in an API 5L X70 steel welded by GMAW process

V. Dagostini, Ariane Neves de Moura, Temístocles de Sousa Luz, Nicolau Apoena Castro, M. T. D. Orlando, Estéfano Aparecido Vieira

Citations: 22 • 2021

Quantitative Correlation between Thermal Cycling and the Microstructures of X100 Pipeline Steel Laser-Welded Joints

Gang Wang, Jinzhao Wang, Limeng Yin, Huiqin Hu, Zongxiang Yao

Citations: 17 • 2019

Research on Filling Strategy of Pipeline Multi-Layer Welding for Compound Narrow Gap Groove

Tie Yin, Jinpeng Wang, Hong Zhao, Lun Zhou, Zenghuan Xue, Hehe Wang

Citations: 16 • 2022

Dissimilar welding between conventional and high strength low alloy naval steels with the use of robotic metal cored arc welding

Marios Kazasidis, Dimitrios Pantelis, Francisca G. Caballero, C. Capdevila, Jonathan Cassidy, E.P. Bilalis, Rocco Lupoi

Citations: 9 • 2021

Microstructure and Properties of High Strength Steel Weld Metals

J. A. Gianetto, Graeme Robertson Goodall, W. R. Tyson, Fateh Fazeli, Marie Quintana, V. B. Rajan, Y. Chen

Citations: 6 • 2012

Influence of the formulation of a flux-cored wire on the microstructure and hardness of welded metal

Érriston Campos Amaral, J L Jácome-Carrascal, Andrés M. Moreno-Uribe, Alexandre Queiróz Bracarense

Citations: 4 • 2021

Localized rapid cooling and microstructural banding in 316LSi multilayered thin wall: perspectives from the robotic wire and pulsed arc additive manufacturing (WPAAM) process

Guilherme Gadelha De Sousa Figueiredo, Ivan Bezerra de Mello Picchi, Helen Rodrigues ARAÚJO, Edwar Andrés Torres López, Tiago Felipe de Abreu Santos

Citations: 2 • 2026

HEAT INPUT EFFECT OF THE FCAW PROCESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF STRUCTURAL STEEL JOINTS

Uğur Gürol

Citations: 2 • 2022

On the effect of Qnet on compressive residual stresses and ductile toughness of dissimilar HAZ in robotic GMAW joints between A572-50 and A36 steels

Benjamín Vargas Arista, Isidro Guzmán Flores, Celso Eduardo Cruz González, Leopoldo Ríos Vargas, J. del Prado Villasana

Citations: 2 • 2021