Dual-Envelope Constrained Nonlinear MPC for Distributed Drive Electric Vehicles Drifting Under Bounded Steering and Direct Yaw-Moment Control
Yurun Gan, Ziyu Song, Jing Yang, Zheng Lin, Jianuo Zhang, Tongtong Gu, Haitao Ding, Nan Xu, Por Lip Yee, Wei Ni, Jun Luo
- Year
- 2026
- Access
- Open access
Abstract
Distributed drive electric vehicles offer superior yaw moment control for autonomous drifting in extreme maneuvers. Conventional drift analysis constructs stability boundaries from open loop equilibria points and assumes a fixed envelope structure. However, coupling among control inputs reshapes the phase plane and shifts saddle point location, which can invalidate open loop envelopes when used for closed loop drifting. To address this issue, a saddle point coordinate model is established in this paper by combining a nonlinear tire model with the handling diagram and explicitly accounting for road adhesion coefficient, longitudinal velocity, front wheel steering angle, and additional yaw moment. Based on saddle point properties, an extended dual envelope framework is constructed in the phase plane of slip angle and yaw rate. Using the convergence tendency of state points toward saddle points under bounded control inputs, the outer envelope defines a recoverable set under constraints on front wheel steering angle and additional yaw moment. The inner envelope characterizes the non-drifting stability region associated with unsaturated tire forces. Finally, a nonlinear model predictive control (NMPC) controller is developed using the extended dual envelope constraint. Hardware-in-the-loop experiments show that, compared with NMPC without envelope constraints, the proposed method enables smoother convergence toward the drift saddle point, reduces the steady-state tracking errors of vehicle speed, sideslip angle, and yaw rate by 33.07%, 71.18%, and 31.27%, respectively, and decreases the peak tracking error by 63.66% under road-friction mismatch.
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026
Design and dynamic performance prediction of a novel large-aperture offset-feed deployable antenna
Chuang Shi, Tianming Liu, Ning Xue +6 more
Aerospace Science and Technology · 2026