Communications-Aware NMPC for Multi-Rotor Aerial Relay Networks Under Jamming Interference
Giuseppe Silano, Daniel Bonilla Licea, Davide Liuzza, Antonio Franchi, Martin Saska
- Year
- 2026
- Access
- Open access
Abstract
Multi-Rotor Aerial Vehicles (MRAVs) are increasingly used in communication-dependent missions where connectivity loss directly compromises task execution. Existing anti-jamming strategies often decouple motion from communication, overlooking that link quality depends on vehicle attitude and antenna orientation. In coplanar platforms, "tilt-to-translate" maneuvers can inadvertently align antenna nulls with communication partners, causing severe degradation under interference. This paper presents a modular communications-aware control framework that combines a high-level max-min trajectory generator with an actuator-level Nonlinear Model Predictive Controller (NMPC). The trajectory layer optimizes the weakest link under jamming, while the NMPC enforces vehicle dynamics, actuator limits, and antenna-alignment constraints. Antenna directionality is handled geometrically, avoiding explicit radiation-pattern parametrization. The method is evaluated in a relay scenario with an active jammer and compared across coplanar and tilted-propeller architectures. Results show a near two-order-of-magnitude increase in minimum end-to-end capacity, markedly reducing outage events, with moderate average-capacity gains. Tilted platforms preserve feasibility and link quality, whereas coplanar vehicles show recurrent degradation. These findings indicate that full actuation is a key enabler of reliable communications-aware operation under adversarial directional constraints.
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026
Design and dynamic performance prediction of a novel large-aperture offset-feed deployable antenna
Chuang Shi, Tianming Liu, Ning Xue +6 more
Aerospace Science and Technology · 2026