Factorial experiment

Sensitivity analysis for process parameters in GMA welding processes using a factorial design method

I.S. Kim, Kwang-Jae Son, Yan Yang, Prasad K.D.V. Yaragada

Citations: 170 • 2003

Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing

Yiwei Weng, Bing Lu, Mingyang Li, Zhixin Liu, Ming Jen Tan, Shunzhi Qian

Citations: 144 • 2018

A simulation-based experiment for comparing AMHS performance in a semiconductor fabrication facility

Gerald T. Mackulak, Paul Savory

Citations: 71 • 2001

Human-Robot Interaction in Assisted Personal Services: Factors Influencing Distances That Humans Will Accept between Themselves and an Approaching Service Robot

Christopher Brandl, Alexander Mertens, Christopher Schlick

Citations: 52 • 2016

Analysis of a 29 Full Factorial Chemical Library

S. Stanley Young, Douglas M. Hawkins

Citations: 47 • 1995

Human-Robot Interaction: Proximity and Speed—Slowly Back Away from the Robot!

Keith R. MacArthur, Kimberly Stowers, Peter A. Hancock

Citations: 37 • 2016

Design optimization using ANOVA

Khalid Hafeez, Hefin Rowlands, Gopal K. Kanji, Shahid Iqbal

Citations: 24 • 2002

Screening of factors influencing the performance of manipulator using combined array design of experiment approach

B.K. Rout, Ravi Kant Mittal

Citations: 18 • 2008

Factorial design for the development of automated solid-phase extraction in the 96-well format for determination of tesaglitazar, in plasma, by liquid chromatography–mass spectrometry

Henrik Svennberg, Susanne Bergh, Helene Stenhoff

Citations: 16 • 2003

Accelerated automated screening of viscous graphene suspensions with various surfactants for optimal electrical conductivity

Daniil Bash, Frederick Hubert Chenardy, Zekun Ren, Jayce Jian Wei Cheng, Tonio Buonassisi, Ricardo Oliveira, Jatin Kumar, Kedar Hippalgaonkar

Citations: 14 • 2022

A Laboratory-Built Fully Automated Ultrasonication Robot for Filamentous Fungi Homogenization

Ya Xiong, Volha Shapaval, Achim Köhler, Pål Johan From

Citations: 13 • 2019

A modeling study to evaluate the quality of wood surface

Ender Hazır, Küçük Hüseyin Koç

Citations: 13 • 2018

Response surface modeling and optimization of single axis automatic application of automotive polyurethane coatings on plastic components

N. Arunkumar, P. H. J. Venkatesh, Kadivendi Srinivas, Sanjiv Kaushik

Citations: 12 • 2012

An Integrated Laboratory Workflow for the Design of a Foam Pilot in Malaysia

Max Chabert, L. Nabzar, Mikel Morvan, Siti Rohaida Mohd Shafian, Pauziyah Abdul Hamid, M Faizal Sedaralit, Nasir Darman

Citations: 12 • 2013

A simulation study of robotic welding system with parallel and serial processes in the metal fabrication industry

Carl R. Williams, Peraset Chompuming

Citations: 11 • 2003

Application of statistical techniques in modeling and optimization of a snake robot

Hadi Kalani, Alireza Akbarzadeh, Hossein Bahrami

Citations: 8 • 2012

A high‐throughput and design of experiment mediated optimization of pigment‐based ink formulations

Jose Maria Lopez Pedrosa, Mark Bradley

Citations: 7 • 2008

Application of the Taguchi method to the design of a robot sensor

Hefin Rowlands, Duc Truong Pham

Citations: 6 • 1995

Robust Parameter Design of an Ascender Affecting Rope Deformation for High Repeatability

Dong-geun Hyun, Jeongmo Yang, TaeWon Seo

Citations: 5 • 2023

Simultaneous parametric optimization of micro-EDM drilling of brass C360 using Taguchi based grey relation analysis

Pranav Kumar, L. N. Pattanaik, Ritesh Kumar Singh

Citations: 5 • 2021