Cement

Additive manufacturing of geopolymer for sustainable built environment

Biranchi Panda, Suvash Chandra Paul, Yi Wei Daniel Tay, Ming Jen Tan

Citations: 495 • 2017

3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties

Kequan Yu, Wes McGee, Tsz Yan Ng, He Zhu, Victor C. Li

Citations: 211 • 2021

3D printing for construction based on a complex wall of polymer-foam and concrete

Benoît Furet, Philippe Poullain, Sébastien Garnier

Citations: 183 • 2019

Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing

Yiwei Weng, Bing Lu, Mingyang Li, Zhixin Liu, Ming Jen Tan, Shunzhi Qian

Citations: 144 • 2018

A Study into the Effect of Different Nozzles Shapes and Fibre-Reinforcement in 3D Printed Mortar

Pshtiwan Shakor, Shami Nejadi, Gavin Paul

Citations: 135 • 2019

Yield stress and viscosity equations for mortars and self-consolidating concrete

Jean-Yves Petit, Éric Wirquin, Yannick Vanhove, Kamal H. Khayat

Citations: 105 • 2007

Cementitious composites blending with high belite sulfoaluminate and medium-heat Portland cements for largescale 3D printing

Wang Li, Hui Ma, Zhijian Li, Guowei Ma, Jingyuan Guan

Citations: 72 • 2021

Effects of deposition velocity in the presence/absence of E6-glass fibre on extrusion-based 3D printed mortar

Pshtiwan Shakor, Shami Nejadi, Sheila Sutjipto, Gavin Paul, N Gowripalan

Citations: 70 • 2020

Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing

Alexander Lin, Yu Tan, Chi‐Hwa Wang, Harn Wei Kua, Hayden Taylor

Citations: 42 • 2020

Behavior of Pultruded Glass-Fiber-Reinforced Polymer Beam-Columns Infilled with Engineered Cementitious Composites under Cyclic Loading

Yoganantham Chinnasamy, P. S. Joanna, Karthikeyan Kothanda, G. Beulah Gnana Ananthi, Krishanu Roy

Citations: 31 • 2022

Mobile robot localization and map building: a multisensor fusion approach

Tim Bailey, Hugh Durrant‐Whyte

Citations: 31 • 2003

Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry

Wilson Ricardo Leal da Silva, H. Fryda, Jean-Noël Bousseau, Pierre-Antoine Andreani, Thomas Juul Andersen

Citations: 25 • 2019

Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC/SHCC)

Wes McGee, Tsz Yan Ng, Kequan Yu, Victor C. Li

Citations: 25 • 2020

“The Slug Test”: Inline Assessment of Yield Stress for Extrusion-Based Additive Manufacturing

Nicolas Ducoulombier, Paul Carneau, Romain Mesnil, Léo Demont, Jean‐François Caron, Nicolas Roussel

Citations: 24 • 2020

Blockbot: A robot to automate construction of cement block walls

Alexander H. Slocum, Bruce Schena

Citations: 23 • 1988

Early-Age Mechanical Properties of 3D-Printed Mortar with Spent Garnet

Szymon Skibicki, Patrycja Jakubowska, Maria Kaszyńska, Daniel Sibera, Krzysztof Cendrowski, M. Hoffmann

Citations: 21 • 2021

Fluoroscopy-Based 3-D Reconstruction of Femoral Bone Cement: A New Approach for Revision Total Hip Replacement

J. Ohnsorge, Erik Schkommodau, S. Jetzki, D. Wirtz, Klaus Radermacher

Citations: 20 • 2005

Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab

Patrick Bedarf, Anna Szabó, Michele Zanini, Alex Heusi, Benjamin Dillenburger

Citations: 19 • 2022

Ultra-lightweight foamed concrete for an automated facade application

Thomas F. Adams, Anya Vollpracht, Johannes Haufe, Linda Hildebrand, Sigrid Brell‐Çokcan

Citations: 19 • 2018

3D Printing of Concrete with a Continuum Robot Hose Using Variable Curvature Kinematics

Manu Srivastava, Jake Ammons, Abdul Basit Peerzada, Venkat Krovi, Prasada Rao Rangaraju, Ian D. Walker

Citations: 16 • 2022