Aluminium

Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: A review

Babatunde Olamide Omiyale, Temitope Olumide Olugbade, T.E. Abioye, Peter Kayode Farayibi

Citations: 223 • 2022

Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys

Beytullah Gungor, Erdinç Kaluç, Emel Taban, Aydın Şik

Citations: 154 • 2013

Alumina–aluminum interpenetrating-phase composites with three-dimensional periodic architecture

Christopher W. San Marchi, M. Kouzeli, R. Rao, Jennifer A. Lewis, David C. Dunand

Citations: 153 • 2003

Superhydrophobic Polyolefin Surfaces:  Controlled Micro- and Nanostructures

Esa Puukilainen, Tiina Rasilainen, Mika Suvanto, Tapani A. Pakkanen

Citations: 134 • 2007

Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering

Marina Cabrini, Sergio Lorenzi, Tommaso Pastore, Simone Pellegrini, Diego Manfredi, Paolo Fino, Sara Biamino, Claudio Francesco Badini

Citations: 122 • 2016

Evaluation of wire arc additive manufacturing for large-sized components in naval applications

Antoine Queguineur, Guillaume Rückert, F. Cortial, Jean-Yves Hascoët

Citations: 113 • 2017

Review of recent trends in friction stir welding process of aluminum alloys and aluminum metal matrix composites

John Victor Christy, Abdel‐Hamid I. Mourad, Muhammad M. Sherif, B. Shivamurthy

Citations: 107 • 2021

Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components

Karan S. Derekar, J. Lawrence, Geoff Melton, Adrian Addison, Xiang Zhang, Lei Xu

Citations: 99 • 2019

Current and Future Uses of Aluminum in the Automotive Industry

Russell Long, Eric Boettcher, Dan Crawford

Citations: 97 • 2017

Direct Fabrication of Joints based on Direct Metal Laser Sintering in Aluminum and Titanium Alloys

Flaviana Calignano, Diego Manfredi, Elisa Paola Ambrosio, Sara Biamino, Matteo Pavese, Paolo Fino

Citations: 53 • 2014

Formability of a wire arc deposited aluminium alloy

Carlos M.A. Silva, Ivo M. F. Bragança, Afonso Cabrita, L. Quintino, P.A.F. Martins

Citations: 51 • 2017

Jaguar uses X350 car to pioneer use of self‐piercing rivets

John Mortimer

Citations: 48 • 2001

Formation of interlayer gap and control of interlayer burr in dry drilling of stacked aluminum alloy plates

Wei Tian, Jian Hu, Wenhe Liao, Bu Yin, Lin Zhang

Citations: 47 • 2015

Flexible/Bendable Acoustofluidics Based on Thin-Film Surface Acoustic Waves on Thin Aluminum Sheets

Yong Wang, Qian Zhang, Ran Tao, Jin Xie, Pep Canyelles-Pericas, Hamdi Torun, Julien Reboud, Glen McHale, Linzi E. Dodd, Xin Yang, Jingting Luo, Qiang Wu, Yongqing Fu

Citations: 47 • 2021

Refill friction stir spot welding of surface-treated aerospace aluminum alloys with faying-surface sealant

Enkhsaikhan Boldsaikhan, Shintaro Fukada, Mitsuo Fujimoto, Kenichi Kamimuki, Hideki Okada

Citations: 45 • 2019

High Rotation Speed Friction Stir Welding for 2014 Aluminum Alloy Thin Sheets

Shujin Chen, Junrong Xue, Ruiyang Ni, Yue Guo, Jianghui Dong

Citations: 43 • 2017

Development and industrial scale-up of ZrO2 coatings and hybrid organic–inorganic coatings used as pre-treatments before painting aluminium alloys

Francesco Andreatta, L. Paussa, Alex Lanzutti, M. Aparicio, Yolanda Castro, Alicia Durán, Dieter Ondratschek, L. Fedrizzi

Citations: 43 • 2011

Properties and optimization of dissimilar aluminum steel CMT welds

Erdem Ünel, Emel Taban

Citations: 41 • 2016

Image Processing of Aluminum Alloy Weld Pool for Robotic VPPAW Based on Visual Sensing

C.-S. Jiang, Fubiao Zhang, Zhenmin Wang

Citations: 36 • 2017

Combining Additive Manufacturing with Advanced Composites for Highly Integrated Robotic Structures

Daniel-Alexander Türk, Lukas Triebe, Mirko Meboldt

Citations: 35 • 2016