Frequency-weighted feedforward control for dynamic compensation in ionic polymer–metal composite actuators

Abstract

Ionic polymer–metal composites (IPMCs) are innovative materials that offer combined sensing and actuating ability in lightweight and flexible package. IPMCs have been exploited in robotics and a wide variety of biomedical devices, for example, as sensors for teleoperation, as actuators for positioning in active endoscopy, as fins for propelling aquatic robots, and as an injector for drug delivery. In the actuation mode, one of the main challenges is precise position control. In particular, IPMC actuators exhibit relaxation behavior and nonlinearities; and at relatively high operating frequencies dynamic effects limit accuracy and positioning bandwidth. A frequency-weighted feedforward controller is designed to account for the IPMC's structural dynamics to enable fast positioning. The control method is applied to a custom-made Nafion-based IPMC actuator. The controller takes into account the magnitude of the control input to avoid generating excessively large voltages which can damage the IPMC actuator. To account for unmodeled effects not captured by the dynamics model, a feedback controller is integrated with the feedforward controller. Experimental results show a significant improvement in the tracking performance when feedforward control is used. For instance, the feedforward controller shows over 75% reduction in the tracking error compared to the case without feedforward compensation. Finally, the integrated feedforward and feedback control system reduces the tracking error to less than 10% for tracking an 18-Hz triangle-like trajectory. Some of the advantages of feedforward control as well as its limitations are also discussed.