Industrial arm / Cobot
EasyArc™ Plasma Cutting Cart
Specifications
- Depth
- 483 mm
- Reach (mm)
- 1050
- Width
- 233 mm
- Height
- 430 mm
- Weight
- 29 kg
- Payload
- 5 kg
- Input current (a)
- 52/50/44/22 A @ 9kW (1-PH); 32/31/27/13/13 A @ 9 kW (3-PH)
- Input voltage (v)
- 200-480 V, 1-PH, 50/60 Hz; 200–600 V, 3-Ph, 50/60 Hz
- Power output kw
- 9
- Tcp speed max (ms)
- 2.2
- Gas pressure bar
- 7.6–8.3 (optimum); 5.2 (minimum)
- Upgrade reach (mm)
- 1920
- Duty cycle percent
- 50% @ 65 A, 230-600 V, 1/3-PH; 40% @ 65 A, 200-208 V, 1/3-PH; 100% @ 46 A, 230-600 V, 1/3-PH
- Upgrade payload (kg)
- 10
- Max output current (a)
- 65
- Pierce thickness (mm)
- 22
- Output current range (a)
- 20–65
- Cut speed severance mms
- 125
- Rotary boom extension m
- 1.5
- Open circuit voltage vdc
- 295
- Rated output voltage vdc
- 139
- Cut speed recommended mms
- 500
- Dual station table size (mm)
- 1000 × 1500
- Gas flow rate cutting l (min)
- 250
- Gas flow rate gouging l (min)
- 250
- Input power cable length m
- 3
- Servo travel track length m
- 3.1
- Severance cut thickness (mm)
- 50
- Engine drive requirement kw
- 15
- Recommended cut thickness (mm)
- 32
- Single axis positioner speed rpm
- 0–20
- Single axis positioner capacity lb
- 300
- Two axis skyhook positioner speed rpm
- 0–5
- Two axis skyhook positioner capacity lb
- 1350
Overview
The EasyArc Plasma Cutting Cart is a flexible, easy-to-use robotic plasma cutting system that integrates Hypertherm Powermax65 SYNC with ABB GoFa collaborative robot. It requires no G-code or CNC programming, using a guided interface for path creation. Features touch sensing for real-time accuracy, compact mobile design, and automatic parameter setup via RFID. Delivers consistent cut quality across carbon steel, stainless, and aluminum. Optional upgrades include long-arm robot, positioners, and dual-station table.
Key features
- ▸Integrates Hypertherm Powermax65 SYNC with ABB GoFa collaborative robot
- ▸No G-code or CNC programming required; guided teach pendant
- ▸Touch sensing for real-time accuracy and part position compensation
- ▸Compact mobile cart with locking casters, single 240 VAC power connection
- ▸Automatic plasma parameter selection via RFID cartridge
- ▸Recommended cut thickness 32 mm, severance 50 mm
- ▸Robot TCP speed up to 2.2 m/s, 1050 mm reach
- ▸Optional upgrades: 10 kg/1920 mm long-arm, positioners, dual-station table
- ▸On-site support and training available (3-day or 5-day)
- ▸1-year warranty on cart and power supply; 1-year torch warranty