A Robot Coordinate Measurement System Based on Pull Wire Sensor and Its Parameter Identification Method

摘要

Aiming at the problems of large robot error and difficult coordinate detection, a robot coordinate measurement system and parameter identification method based on pull wire sensor are proposed. Firstly, a robot coordinate measurement system based on pull wire sensor is established. Secondly, Levenberg-Marquarelt algorithm is used to solve the kinematics parameters of the robot. Finally, the neural network of the whole connection layer is used to predict the optimal compensation amount for secondary compensation. In order to verify the above theory, the robot coordinate measurement system is built and verified on the five degree of freedom robot experimental platform. The results show that the robot coordinate measurement system can measure the robot coordinates quickly and accurately. The secondary compensation method controls the accuracy of the robot to about 2mm, and the optimal error is controlled within 0.012mm. The absolute positioning accuracy of the robot is effectively improved.