Grain size

Chemical ordering in Ni-Mn-Ga Heusler alloys

R.W. Overholser, Manfred Wuttig, D. A. Neumann

Citations: 145 • 1999

A novel material removal rate model based on single grain force for robotic belt grinding

Lufeng Li, Xukai Ren, Hengjian Feng, Huabin Chen, Xiaoqi Chen

Citations: 71 • 2021

Mechanical Properties Enhancement of Additive Manufactured Ti-6Al-4V by Machine Hammer Peening

Leonor Neto, Stewart Williams, Jialuo Ding, Jan Hönnige, Filomeno Martina

Citations: 40 • 2019

Effect of micro morphology in different zones on mechanical properties of 2060 Al-Li alloy laser welded joints

Ting Liu, Yanqiu Zhao, Yue Kang, Xiaohong Zhan

Citations: 37 • 2019

Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope

Amir Masoud Tahvilian, Zhaoheng Liu, Henri Champliaud, Bruce Hazel, Marin Lagacé

Citations: 26 • 2015

Aluminium coating of lead zirconate titanate—A study of cold spray variables

Peter C. King, Saden H. Zahiri, Mahnaz Jahedi, James Friend

Citations: 25 • 2010

On energetic evaluation of robotic belt grinding mechanisms based on single spherical abrasive grain model

Zeyuan Yang, Xiaohu Xu, Dahu Zhu, Sijie Yan, Han Ding

Citations: 24 • 2019

Bi-doping engineering of Ni-Mn-Ga polycrystals and resulting grain particles for smart Ni-Mn-Ga/polymer composites

Wan‐Ting Chiu, Pimpet Sratong-on, Tso‐Fu Mark Chang, Masaki Tahara, Masato Sone, V. A. Chernenko, Hideki Hosoda

Citations: 15 • 2022

Laser welding of AISI 410S ferritic stainless steel

Ceyhun Köse, Ceyhun Topal

Citations: 14 • 2019

Effects of Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of Automatic Laser-Arc Hybrid Welded AZ31B Magnesium Alloys

Jin Xiong, Ruochao Wang, Dongqing Zhao, Hongtao Liu, Jixue Zhou

Citations: 10 • 2024

The system for simulation and off-line, remote programming of the Mitsubishi Movemaster RV-M1 robot

J. Świder, K Foit, G. Wszołek, D. Mastrowski

Citations: 10 • 2007

Data related to optimized process parameters influence on hardness, microstructural evolution and wear resistance performance of Al-Si-Sn-Cu/Ti-6Al-4V composite coatings

O.S. Fatoba, Esther T. Akinlabi, Stephen A. Akinlabi, Mary C. Obiegbu

Citations: 7 • 2019

Improved wear resistance of cemented carbide impact needle under high frequency micro-amplitude impact treated by high current pulsed electron beam

Shuiqing Liu, Jinyuan Fu, Xiao Shen, Biao Chen, Xu Han

Citations: 6 • 2023

Using Wind Dispersion Effects During the InSight Tether Burial Activities to Better Constrain the Regolith Grain Size Distribution

Nicolas Verdier, V. Ansan, Pierre Delage, Khaled Ali, É. Beucler, Constantinos Charalambous, Eddy Constant, Aymeric Spiga, M. P. Golombek, E. Marteau, Rémi Lapeyre, E. Gaudin, Charles Yana, K. Hurst, Philippe Lognonné, Bruce W. Banerdt

Citations: 5 • 2023

Influence of Cr3C2-NiCr Feedstock Powder Characteristics on Deposition Efficiency, Coating Microstructure, and Abrasion Wear Resistance

L.‐M. Berger, S. Thiele, T. Börner, Leo Janka, Manel Rodríguez Ripoll

Citations: 4 • 2014

Magnetic properties and microstructures of hydrogenation-disproportionation-desorption-recombination processed Nd-Fe-B powders by grain boundary diffusion of Nd-Cu-Al

Zilong Wang, Yang Luo, Dunbo Yu, Zhongkai Wang, Yuanfei Yang, Weikang Shan, Hongbin Zhang, Wenlong Yan, Ning-Tao Quan, Shengjie Zhu

Citations: 4 • 2022

Austenite Grain Refinement and Homogenization Control of the Flexspline for Industrial Robot Harmonic Drive

Chaolei Zhang, Zhuhao Shao, Yucheng Zhu, Jian Li

Citations: 3 • 2021

Achieving equiaxed grain microstructure and isotropic properties in titanium thin-walled components by laser-directed energy deposition

Xuewen Liu, Ziliang Huang, Jiaqiang Chang, Hai Chang, Sensen Huang, Yingna Wu, Zhenbo Zhang, Yingjie Ma, Zirong Zhai, Rui Yang

Citations: 2 • 2025