Equiaxed crystals

Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties

Jinguo Ge, Jian Lin, Yan Chen, Yongping Lei, Hanguang Fu

Citations: 88 • 2018

Research on the Microstructure Characteristic and Tensile Property of Laser-MIG Hybrid Welded Joint for 5A06 Aluminum Alloy

Yanqiu Zhao, Xiaohong Zhan, Qiyu Gao, Shuai Chen, Yue Kang

Citations: 36 • 2019

Optimization of Process Parameters to Improve the Effective Area of Deposition in GMAW-Based Additive Manufacturing and its Mechanical and Microstructural Analysis

Ali Waqas, Xiansheng Qin, Jiangtao Xiong, Hongbo Wang, Chen Zheng

Citations: 36 • 2019

Deformation processing in superplasticity regime-production of aircraft engine compressor discs out of titanium alloys

Mahesh C. Somani, R. Sundaresan, O. A. Kaĭbyshev, A.G Ermatchenko

Citations: 23 • 1998

Microstructure and fatigue damage mechanism of 6082-T6 aluminium alloy welded joint

Minqi Zhu, Shanglei Yang, Yishan Bai, Cong Fan

Citations: 21 • 2021

Deposition structure dependence of microstructural evolution and mechanical anisotropy of H13 buildups using cold metal transfer technology

Jinguo Ge, Rongwei Xu, Chenglei Wang, Qing Huang, Qingyuan Liu, Yuhong Long, Liang Zhang

Citations: 17 • 2021

The influence of heat input on the microstructure and solute segregation mechanism of invar alloy laser melting deposition process

Xiaohong Zhan, Junjie Zhou, Chaoqi Qi, Dongdong Gu

Citations: 10 • 2018

Temperature Distribution and Welding Distortion Measurements After FSW of Al 6082-T6 Sheets

Yu. A. Golubev, Evgenii V. Chernikov, Anton Naumov, Vesselin Michailov

Citations: 9 • 2015

Dissimilar welding between conventional and high strength low alloy naval steels with the use of robotic metal cored arc welding

Marios Kazasidis, Dimitrios Pantelis, Francisca G. Caballero, C. Capdevila, Jonathan Cassidy, E.P. Bilalis, Rocco Lupoi

Citations: 9 • 2021

Mechanical and microstructure characteristics of 7475-T7351 aluminium alloy joints welded by robot cold metal transfer

Hari Shanker, Reeta Wattal

Citations: 9 • 2023

Development of Wire Arc Additive Manufactured Cu-Si Alloy: Study of Microstructure and Wear Behavior

Kashif Hasan Kazmi, Sumit K. Sharma, Alok Kumar Das, Amitava Mandal, Amarish Kumar Shukla

Citations: 7 • 2023

Effect of robotic weaving motion on mechanical and microstructural characteristics of wire arc additively manufactured NiTi shape memory alloy

Karuna Kumar Gonela, V. Chakkravarthy, Manojkumar Palanivel, L. Mariappan, A. Rajesh Kannan

Citations: 7 • 2023

Production and Evaluation of Microstructure and Mechanical Properties of Stellite 6 Prototype Parts by Robotic Wire Arc Additive Manufacturing

Jonah Nadarajan Murugan, S. Vetrivel Duraisamy, V. Parvathi Priya, R. Arulmani

Citations: 4 • 2022

Microstructure Characterization of AZ31B Mg Alloy Welds Processed by Nd:YAG Laser Welding

Hong Tao Liu, Ruo Chao Wang, Qing Liu, Ji Zhou, Yan Fei Chen, Bai Chang, Yuansheng Yang

Citations: 3 • 2017

Achieving equiaxed grain microstructure and isotropic properties in titanium thin-walled components by laser-directed energy deposition

Xuewen Liu, Ziliang Huang, Jiaqiang Chang, Hai Chang, Sensen Huang, Yingna Wu, Zhenbo Zhang, Yingjie Ma, Zirong Zhai, Rui Yang

Citations: 2 • 2025

Additive Manufacturing of Thin-Wall Steel Parts by Gas Metal Arc Welding Robot: The Surface Roughness, Microstructures and Mechanical Properties

Van Thao Le, Dinh Si, Chau Van Tran, Tat Khoa Doan

Citations: 2 • 2021