Control of Wireless Network Communication for Industrial Robot Servo Systems

Abstract

To meet the needs of high speed and good environmental adaptability for data transmission in industrial robot servo systems, this paper presents a wireless transmission technology on a data acquisition control terminal. The system is based on STM32F103RET6 processor and reads cache data from the SRAM of FPGA in DMA method, and communicates with a WIFI chip, Marvell 88w8686, through the SDIO interface. A host computer segments and filters the data received by the WIFI chip and sends control commands back to STM32. The functions of the hardware and software of the system contains data compression and storage, wireless data transmission, data display, and control-command transmission. An experimental platform has been built. It carries out real-time transmission of 8-16 digits based on the TCP/IP protocol with expected performance.