Transient synchronization stability analysis and assessment of DFIG system under severe faults
Hongsheng Xu, Meng Zhan
- Year
- 2025
- Access
- Open access
Abstract
In the transient stability analysis of renewable energy grid-tied systems, although a large amount of works have devoted to the detailed electromagnetic transient simulation and the stability analyses of during-fault stage, the whole low-voltage ride through (LVRT) process and relevant transient stability mechanism remain to be uncovered. Taking the doubly fed induction generator system as the objective, this paper divides the transient processes into four different stages, including the pre-fault, during-fault, early post-fault, and late post-fault ones, establishes the full mechanism models for each stage, and studies the switching dynamics in detail. It is found that the during-fault dynamics can be determined by the phase-lock loop second-order equation within the framework of the generalized swing equation (GSE). For the early post-fault stage, it can be treated as a series of quasi-steady states and its dominant driving system dynamics can still be described by the GSE. Based on the local dynamics of unstable equilibrium point, the system transient stability can be completely determined by whether the initial state of the early post-fault stage is within or out of its basin of attraction (BOA). Based on these observations, the BOA-based and equal area criterion (EAC)-based transient stability assessment methods are developed, which are supported by broad numerical simulations and hardware-in-the-loop experiments. This work provides a clear physical picture and perfectly solves the difficult stability analysis problem when severe faults and LVRT have to be considered in most of DFIG engineering situations.
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026
Design and dynamic performance prediction of a novel large-aperture offset-feed deployable antenna
Chuang Shi, Tianming Liu, Ning Xue +6 more
Aerospace Science and Technology · 2026