Solar Daylighting to Offset LED Lighting in Vertical Farming: A Techno-Economic Study of Light Pipes
Francesco Ceccanti, Aldo Bischi, Marco Antonelli, Andrea Baccioli
- Year
- 2026
- Access
- Open access
Abstract
Vertical farming is a controlled-environment agriculture (CEA) approach in which crops are grown in stacked layers under regulated climate and lighting, enabling predictable production but requiring high electricity input. This study quantifies the techno-economic impact of roof-mounted daylighting in a three-tier container vertical farm using a light-pipe (LP) system that delivers sunlight to the upper tier. The optical chain, comprising a straight duct and a tilting aluminum-coated mirror within a rotating dome, was modelled in Tonatiuh to estimate crop-level photon delivery and solar gains. These outputs were coupled with a transient AGRI-Energy model to perform year-round simulations for Dubai. Tier-3 strategies were compared against a fully LED benchmark, including daylight-only operation, on/off supplementation, PWM dimming, UV-IR filtering, variable-transmittance control, and simple glazing. Ray-tracing predicted an overall LP optical efficiency of 45%-75%, depending on solar position, quantifying the fraction of incident daylight at the collector aperture delivered to the target growing zone. Daylight-only operation reduced the total three-tier yield by 17% and was not economically viable despite 27-29% electricity savings. Hybrid daylight-LED strategies preserved benchmark yield while reducing electricity use. PWM dimming combined with UV-IR filtering achieved the lowest specific electricity energy consumption (6.32 kWh/kg), 14% below the benchmark. Overall, viability remains CAPEX-limited because achievable electricity savings are insufficient to offset the added investment and thus improves mainly under high electricity and carbon-price contexts, although the LP system delivers a 15-38% lower light cost than an optical-fiber reference under identical incident daylight.
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026
Design and dynamic performance prediction of a novel large-aperture offset-feed deployable antenna
Chuang Shi, Tianming Liu, Ning Xue +6 more
Aerospace Science and Technology · 2026