Passive Fault Tolerance through Tension-to-Thrust Feed-Forward: Hybrid Input-to-State Stability for Decentralized Multi-UAV Slung-Load Transport under Abrupt Cable Severance
Hadi Hajieghrary, Paul Schmitt
- Year
- 2026
- Access
- Open access
Abstract
Abrupt cable severance in multi-UAV slung-load transport redistributes load and changes the active constraint set, leaving limited time for fault diagnosis and reconfiguration. Existing controllers rely on coordinated force allocation, peer-state exchange, or fixed cable topology, and therefore lack a certified decentralized recovery mechanism for unannounced severance. We present a passive architecture that routes each vehicle's measured cable tension directly into its altitude thrust command, $T_i^{\mathrm{ff}}=T_i$, while a surrounding proportional-derivative, anti-swing, and projection cascade preserves local tracking feasibility. The main contribution is a conditional hybrid practical input-to-state-stability certificate that composes a slack-excursion-bounded taut-cable reduction, bounded post-severance Lyapunov jumps, inter-fault decay, and per-fault-cycle contraction $ρ\in (0,1)$ into an explicit recovery envelope under stated actuator, slack, and dwell assumptions. We validate the controller in Drake multibody simulation with five vehicles, a 10 kg payload, Kelvin-Voigt cables, Dryden wind, and single- and dual-severance schedules: the closed loop attains 0.312-0.328 m RMSE, 76.1-95.2 mm peak sag, and recovery within one payload-pendulum period. Disabling the identity inflates cruise error by 34-39% and peak sag by 3.6x-4.0x, identifying local tension feed-forward as the dominant passive recovery mechanism in the tested decentralized cascade.
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026
Design and dynamic performance prediction of a novel large-aperture offset-feed deployable antenna
Chuang Shi, Tianming Liu, Ning Xue +6 more
Aerospace Science and Technology · 2026