Aluminium alloy
相关论文数: 17
顶级研究者
最高引用论文
Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering
Marina Cabrini, Sergio Lorenzi, Tommaso Pastore, Simone Pellegrini, Diego Manfredi, Paolo Fino, Sara Biamino, Claudio Francesco Badini
引用数: 122 • 2016
Formability of a wire arc deposited aluminium alloy
Carlos M.A. Silva, Ivo M. F. Bragança, Afonso Cabrita, L. Quintino, P.A.F. Martins
引用数: 51 • 2017
Microstructure and fatigue damage mechanism of 6082-T6 aluminium alloy welded joint
Minqi Zhu, Shanglei Yang, Yishan Bai, Cong Fan
引用数: 21 • 2021
Mechanical characterization and comparison of glass fibre and glass fibre reinforced with aluminium alloy (GFRAA) for automotive application
T. Raghav Arvind, D. Roshann Ram Dayal, K.L. Hari Krishna, S. Survesh
引用数: 15 • 2021
Techno-Economic Assessment of Robotic Sorting of Aluminium Scrap
Bart Engelen, Dieter De Marelle, Dillam Jossue Díaz‐Romero, Simon Van den Eynde, Isiah Zaplana, Jef Peeters, Karel Kellens
引用数: 14 • 2022
Comparative study of microstructural and mechanical properties of robotic CMT and GMAW welded 7475-T7351 aluminium alloy joints
Hari Shanker, Reeta Wattal
引用数: 14 • 2023
Formability Enhancement in Incremental Forming for an Automotive Aluminium Alloy Using Laser Assisted Incremental Forming
Amirahmad Mohammadi, Hans Vanhove, Albert Van Bael, Dieter Weise, Joost R. Duflou
引用数: 10 • 2015
Effect of Al <sub>2</sub> O <sub>3</sub> film on the mechanical properties of a welded high-strength (AW 7020) aluminium alloy
Muyiwa Olabode, Paul Kah, Esa Hiltunen, Jukka Martikainen
引用数: 9 • 2015
Prediction and prevention of material cracking in the case of micro or milli drawn parts made from aluminium foils
Elena Costache, N. Nanu, Bogdan Chiriță, Gheorghe Brabie
引用数: 8 • 2013
Comparative Study of Microstructural and Mechanical Properties of Robotic Cmt and Gmaw Welded 7475-T7351 Aluminium Alloy Joints
HARI SHANKER, Reeta Wattal
引用数: 7 • 2023
WELDING OF A 7025 AL-ALLOY BY A PULSED MIG WELDING PROCESS
Paul Kah, Muyiwa Olabode, Esa Hiltunen, Jukka Martikainen
引用数: 6 • 2013
Wear and Transmission Error between PEEK Bush and 7075 Aluminium Alloy Cam Plate Components in Robot Joints
Hitonobu Koike, Kenji Kanemasu, Kiyoto Itakura, Kenichi Saruwatari, Justyna Rozwadowska, Megumi Uryu, Edson Costa Santos, Katsuyuki Kida
引用数: 4 • 2013
Comparative Finite Element Analysis of a Novel Robot Chassis Using Structural Steel and Aluminium Alloy Materials
Avadhoot Rajurkar, Kunal Dangra, Aryan Deshpande, Madhav Gosavi, Tejas Phadtare, Gajanan Gambhire
引用数: 3 • 2023
Enhancing deposition quality in robotic WAAM of aluminium alloy: the role of deposition angle
Sumit K. Sharma, Kashif Hasan Kazmi, Parth Patel, C.K. Kaithwas, Prashant Sharma, Mukesh Chandra
引用数: 2 • 2025
Effect of welding mode on selected properties of additively manufactured AA5087 aluminium alloy parts
Martin Sahul, Miroslav Sahul, Barbora Bočáková, Ladislav Kolařík, T Němec, Marie Kolaříková
引用数: 2 • 2024
Robotic welding of thin wall components made of 6xxx and 2xxx series aluminium alloys using low-energy methods
Janusz Rykała
引用数: 2 • 2012
Synergy of the Plastic Treatment HPT and Shot Peening in Aluminium Alloy Al-Mg-Mn-Sc-Zr
М. Стеглински, Paulina Byczkowska, J. Sawicki, Ł. Kaczmarek, Bartłomiej Januszewicz, Marek Klich
引用数: 2 • 2016