Development and In-Field Validation of an Autonomous Soil Mechanical Resistance Sensor

摘要

Soil compaction is a widespread problem, leading to soil degradation, yield losses, and adverse environmental impacts. Nowadays, various measurement methods exist to assess and map soil compaction, with vertical cone penetration resistance measurements being one of the most commonly used. This method is easy, rapid, inexpensive, and generally accepted. However, manual penetration resistance measurements are time-consuming, labor-intensive, and often less accurate due to inconsistent penetration speed. To address these limitations, an automated penetrometer was developed and integrated on an autonomous robot platform, paving the way for high-resolution compaction mapping as a starting point for precision subsoiling to remediate soil compaction. The performance of this setup was validated in controlled and field conditions against a hand-held penetrometer. Therefore, experiments were conducted in soil-filled cylinders and on plots of a long-term field experiment, including measurements across spraying tracks. The automated penetrometer demonstrated high correlations with the hand-held device under controlled conditions, though the correlation was somewhat lower in the field due to the soil's heterogeneity. Deviations between the two measurement devices were likely caused by the inconsistent insertion speed of the hand-held penetrometer, particularly in soils with high penetration resistance. Both penetrometers successfully identified the plow pan at a depth of 30-40 cm but were unable to clearly show the effect of the long-term presence of spraying tracks.