Additive Manufacturing Along Principal Stress Lines

摘要

Abstract Optimization techniques developed for additive manufacturing (AM) to maximize the structural stiffness of printed parts are often computationally expensive reformulations of classical procedures that do not typically consider the mechanical behavior introduced to the printed part by the AM fabrication process, which is layer-based, and result in pieces with significant anisotropy. The misalignment of filament orientation and structural action negates the potential benefits of optimization. Addressing this problem, this article presents a two-part research approach exploring a new method of material deposition called Stress Line Additive Manufacturing (SLAM), which deposits filament along paths derived from principal stress lines. The proposed method unifies the design and optimization of the geometry and filament layout of AM-produced parts, and is compatible to the operational characteristics of fused deposition modeling (FDM). Experimentally validating the structural significance of oriented filament, the first part of the research implements SLAM on a commercial platform for planar design cases. Ongoing research to adapt SLAM for complex 2.5D surface geometries using a six-axis industrial robot arm and a custom-designed heated extruder is then presented in Implementation 2: Robot-Enabled SLAM for 2.5-D Cases. The presented research opens new possibilities for structurally performative fabrication.